Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
<6.1
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
<2.1
EC/CAS
7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
0.15-2
EC/CAS
7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
<0.4
General Information
Version
09
Revision date
2014-08-29
Product name
ALUMINUM ALLOYS WITH LEAD
Product Synonyms
Alloys: 2005 * 2007, 2011, 2011A, 2028A, 2028B, 2030, 5058, 6012, 6018, 6042, 6064, 6064A, 6068, 6262, COBN, C243, C278, C2011, C2011S, C2011V, C34J, C40A, C53JU, C6262, C6262V, FJ62
1.2.1 Relevant identified uses
Screw machine stock and extrusions
Manufacturer Name
Alcoa Inc
Emergency telephone
+1-703-527-3887, +1-800-424-9300, +1-412-553-4001
Icons in SDS
Company Information
company name
Alcoa Inc
e-mail address of the competent person responsible for the Safety Data Sheet
acomsds@alcoa.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H334, H351, H360, H373
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Physical hazards
Not classified
Health hazards
Sensitization, respiratory Category 1 Sensitization, skin Category 1 Carcinogenicity Category 2 Reproductive toxicity Category 1A Specific target organ toxicity, repeated Category 2 exposure
Environmental hazards
Not classified
Signal word
Danger
Hazard statements
May cause allergy or asthma symptoms or breathing difficulties if innaled. May cause an allergic skin reaction. Suspected of causing cancer. May damage fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure. May form combustible dust concentrations in air. Material name: ALUMINUM ALLOYS WITH LEAD SDS US 390 Version # 09 Revision 08-29-2014 Issue date 08-29-2014 1/18
Prevention
In case of inadequate ventilation wear respiratory protection. Do not breathe dust/fume/gas/mist/vapors/spray. Obtain special instructions before use. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. Use personal protective equipment as required.
Response
If inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. IF ON SKIN: Wash with plenty of soap and waiter. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. If exposed or concerned: Get medical advice/attention.
Storage
Store in a dry place. Keep dry.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwise None known. classified (HNOC)
Additional information
None. Specific hazards Small chips, fine turnings, and dust from processing may be readily ignitable. Explosion/fire hazards may be present when (See Sections 5, 7 and 10 for additional information): * Dust or fines are dispersed in air. « Chips, dust or fines are in contact with water. * Dust and fines are in contact with certain metal oxides (e.g., rust, copper oxide). * Molten metal in contact with water/moisture or certain metal oxides (e.g., rust, copper oxide). Health effects from mechanical processing (e.g., cutting, grinding) Dust Can cause irritation of the eyes, skin and upper respiratory tract.
2.1 Classification of the substance or mixture
Not classified. Health hazards Sensitization, respiratory Category 1 Sensitization, skin Category 1 Carcinogenicity Category 2 Reproductive toxicity Category 1A Specific target organ toxicity, repeated Category 2 exposure Environmental hazards Not classified. OSHA defined hazards Combustible dust
