Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
<6.1
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
0-0.8
EC/CAS
7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
<0.4
General Information
Revision date
2019-11-21
Product name
ALUMINIUM ALLOYS WITH TIN
Product Synonyms
2012, 2015, 2028, 2041, 2044, 2045, 2111, 6020, 6021, 6023, 6028, 6040, 6041, 2007A, 2007B, 2028C, 2111A, 2111B, 6012A, 6262A, C445, C467, C50J C54H, UltrAlloy® 6020
1.2.1 Relevant identified uses
Screw machine stock and extrusions
Manufacturer Name
Alcoa Corporation
Emergency telephone
+1-703-527-3887 +1-800-424-9300 (24 Hour Emergency Telephone, multiple languages spoken); ALCOA +1-812-853-1111 (24 Hour Emergency Telephone, only English
Icons in SDS
Company Information
company name
Alcoa Corporation
e-mail address of the competent person responsible for the Safety Data Sheet
SDSInfo@alcoa.com
GHS Information
Signal word
Danger
Section 2
Physical hazards
Not classified.
Health hazards
Serious eye damage/eye irritation Category 2B Sensitization, skin Category 1 Carcinogenicity Category 1A
Environmental hazards
Hazardous to the ozone layer Not applicable
Potential health effects
The following statements summarize the health effects generally expected in cases of overexposures. User specific situations should be assessed by a qualified individual. Additional health information can be found in Section 11. The health effects listed below are not likely to occur unless processing of this product generates dusts or fumes.
Signal word
Danger
Hazard statements
Causes eye irritation. May cause an allergic skin reaction. May cause cancer. May form combustible dust concentrations in air.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/vapours. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. Use personal protective equipment as required.
Response
If on skin Wash with plenty of water. If exposed or concerned Get medical advice/attention
Storage
Keep dry.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
2.3 Other hazards
Dust from mechanical processing: May form combustible dust concentrations in air.
Additional information
None. Specific hazards Explosion/fire hazards may be present when (See Sections 5, 7 and 10 for additional information): • Dust or fines are dispersed in air. • Chips, dust or fines are in contact with water. • Dust and fines are in contact with certain metal oxides (e.g., rust, copper oxide). • Molten metal in contact with water/moisture or certain metal oxides (e.g., rust, copper oxide). Dust and fume from processing: Contains nickel. May produce an allergic reaction.
