Note: Ingredients listed on restricted chemical lists
EC/CAS
209-008-0/552-30-7
Name of the chemical
Benzene-1,2,4-tricarboxylic acid 1,2-anhydride
Concentration
≥1.5-<3
EC/CAS
247-952-5/26741-53-7
Name of the chemical
bis(2,4-di-tert-butylphenyl) pentaerythritol diphosphite
Concentration
≥0.4-<1
General Information
Revision date
2016-04-18
Product name
MOR-TEMP(TM) POLAR WHITE GLOSS SMOOTH
1.2.1 Relevant identified uses
Electrostatic coating for use in industrial plants
Icons in SDS
Company Information
company name
AkzoNobel Powder Coatings Limited
e-mail address of the competent person responsible for the Safety Data Sheet
uk.marketingservices@akzonobel.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H319, H334, H412
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
1272/2008]
Product definition
Mixture
CLP CLASSIFICATION
Eye Irrit. 2, H319 Resp. Sens. 1, H334 Skin Sens. 1, H317 Aquatic Chronic 3, H412 The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended.
EU Classification
Directive 1999/45/EC [DPD] The product is classified as dangerous according to Directive 1999/45/EC and its amendments.
Classifications
R42/43
Health hazards
May cause sensitisation by inhalation and skin contact. See Section 16 for the full text of the R phrases or H statements declared above. See Section 11 for more detailed information on health effects and symptoms.
Signal word
Danger
Hazard statements
Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Harmful to aquatic life with long lasting effects.
Prevention
Wear protective gloves. Wear eye or face protection. Avoid release to the environment.
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or physician.
Storage
Not applicable.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazardous Ingredients
benzene-1,2,4-tricarboxylic acid 1,2-anhydride
Supplemental label elements
Not applicable. elements
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Not applicable.
Special packaging requirements
Containers to be fitted Not applicable. with child-resistant fastenings
Tactile warning of danger
Not applicable.
Other hazards which do not result in classification
Fine dust clouds may form explosive mixtures with air. Handling and/or processing of this material may generate a dust which can cause mechanical irritation of the eyes, skin, nose and throat.
