Note: Ingredients listed on restricted chemical lists
EC/CAS
7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
10-25
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
2.5-10
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
2.5-10
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
1-2.5
General Information
Version
; 8
Revision date
2015-12-02
Product name
High Solids Polyurethane Lusterless Enamel
1.2.2. Uses advised against
FOR INDUSTRIAL USE ONLY
Emergency telephone
+1 (800) 424-9300, +1 (703)527-3887
Icons in SDS
Company Information
company name
Akzo Nobel Coatings, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
service@akzonobel.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H303, H316, H319, H336, H412
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Ingredient(s) with unknown acute toxicity
55.5% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 61.6% QMS label elements
Hazard pictograms
<|>^
Signal word
Danger
Hazard statements
Highly flammable liquid and vapor. May be harmful if swallowed. Causes serious eye irritation. Causes mild skin irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects.
Prevention
Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Avoid breathing vapor. Wash hands thoroughly after handling.
Response
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. IF SWALLOWED: Call a POISON CENTER or physician if you feel unwell. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. If skin irritation occurs Get medical attention. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing, if eye irritation persists: Get medical attention.
Storage
Store in a well-ventilated place. Keep cool.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not result in classification
None known, High Solids Polyurethane Lusterless Enamel 666-58-6293 Page: 3/15
2.1 Classification of the substance or mixture
FLAMMABLE LIQUIDS - Category 2 substance or mixture ACUTE TOXICITY (oral) - Category 5 SKIN CORROSION/IRRITATION - Category 3 SERIOUS EYE DAMAGE/ EYE iRRITATiON - Category 2A SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Narcotic effects) Category 3 AQUATIC HAZARD (ACUTE) - Category 3 AQUATIC HAZARD (LONG-TERM) - Category 3 Percentage of the mixture consisting of ingredient(s) of unknown toxicity: 55.5% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 61.6%
