Aerodur Clear 43022

Akzo Nobel Coatings, Inc

Revision date : 2019-11-05

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08 GHS02
Health risk rating 4
Safety risk rating 3
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

64742-95-6

Name of the chemical

Solvent naphtha (petroleum), light arom

Concentration

10-15

EC/CAS

108-10-1

Name of the chemical

4-methylpentan-2-one; isobutyl methyl ketone (MIBK)

Concentration

5-10

EC/CAS

141-78-6

Name of the chemical

acetic acid, ethyl ester

Concentration

5-10

EC/CAS

1330-20-7

Name of the chemical

Xylene

Concentration

1-5

Listed in

EC/CAS

98-82-8

Name of the chemical

Cumol (2022/692)

Concentration

0-1

General Information

Revision date

2019-11-05

Product name

Aerodur Clear 43022

1.2.2. Uses advised against

FOR INDUSTRIAL USE ONLY

Emergency telephone

+1 (800) 424-9300, +1 (703) 527-3887

Icons in SDS

GHS02 GHS07 GHS08 T013 T016

Company Information

company name

Akzo Nobel Coatings, Inc

e-mail address of the competent person responsible for the Safety Data Sheet

service@akzonobel.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H225, H319, H351

Hazard statements

Code

Statements

H225

Highly Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Signal word

Danger

Hazard statements

Highly flammable liquid and vapor. Causes serious eye irritation. Suspected of causing cancer.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventilating, lighting and all material-handling equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Ground/bond container and receiving equipment. Keep container tightly closed. Wash hands thoroughly after handling.

Response

IF exposed or concerned Get medical attention. IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention.

Storage

Store locked up. Store in a well-ventilated place. Keep cool.

Disposal

Dispose of contents and container in accordance with all local, regional, national and international regulations.

2.3 Other hazards

None known.

2.1 Classification of the substance or mixture

EYE IRRITATION - Category 2A CARCINOGENICITY - Category 2 GHS label elements Section 2. Hazards identification Signal word : Danger Hazard statements : Highly flammable liquid and vapor. Causes serious eye irritation. Suspected of causing cancer. Precautionary statements Prevention : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventilating, lighting and all material-handling equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Ground/bond container and receiving equipment. Keep container tightly closed. Wash hands thoroughly after handling. Response : IF exposed or concerned: Get medical attention. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. Storage : Store locked up. Store in a well-ventilated place. Keep cool. Disposal : Dispose of contents and container in accordance with all local, regional, national and international regulations. Hazards not otherwise : None known. classified Section 3. Composition/information on ingredients Substance/mixture : Mixture Ingredient name % CAS number Toluene diisocyanate, oligomeric reaction products with 2,2'-oxydiethanol 25 - 30 53317-61-6 and propylidenetrimethanol Solvent naphtha (petroleum), light arom. 10-15 64742-95-6 Methyl isobutyl ketone 5- 10 108-10-1 ethyl acetate 5-10 141-78-6 3-Isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate, oligomers 5-10 53880-05-0 1 ,2,4-trimethylbenzene 5-10 95-63-6 xylene 1-5 1330-20-7 2-methoxy-1-methylethyl acetate 1-5 108-65-6 ethylbenzene 0-1 100-4 1-4 cumene 0-1 98-82-8 Any concentration shown as a range is to protect confidentiality or is due to batch variation. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. Occupational exposure limits, if available, are listed in Section 8. Section 4. First aid measures ripti fin Sary first ai s Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention. Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours. Skin contact : Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for atleast 10 minutes. Get medical attention. Wash clothing before reuse. Clean shoes thoroughly before reuse. Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. Eye contact : Causes serious eye irritation. Inhalation : Noknown significant effects or critical hazards. Skin contact : No known significant effects or critical hazards. Ingestion : Noknown significant effects or critical hazards. Over-exposure signs/symptoms Eye contact : Adverse symptoms may include the following: pain or irritation watering redness Inhalation : No specific data. Skin contact : No specific data. Ingestion : No specific data. ‘a ait

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.