Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
20-35
EC/CAS
200-857-2/75-28-5
Name of the chemical
iso-Butan, enthält 0,1% Butadien
Concentration
2.5-10
EC/CAS
13674-84-5
Name of the chemical
Tris(2-chloro-1-methylethyl) phosphate
Concentration
2-10
General Information
Revision date
2015-12-10
Product name
P88 MAXIMUM PU FOAM
Icons in SDS
Company Information
company name
AKTEK DIŞ TİC. LTD
e-mail address of the competent person responsible for the Safety Data Sheet
info@aktekltd.com.tr
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
CLP CLASSIFICATION
CLP]Mixture/Substance SDS EU 2015 According to Regulation (EU) 2015/830 (REACH Annex II) Aerosol, Category 1 H222;H229 On basis of test data Acute toxicity (inhalation:gas) Category 4 H332 Calculation method Skin corrosion/irritation, Category 2 H315 Calculation method Serious eye damage/eye irritation, Category 2 H319 Calculation method Sensitisation — Respiratory, Category 1 H334 Calculation method Sensitisation — Skin, Category 1 H317 Calculation method Carcinogenicity, Category 2 H351 Calculation method Specific target organ toxicity — Single exposure, Category 3, Respiratory tract irritation H335 Calculation method Specific target organ toxicity — Repeated exposure, Category 2 H373 Calculation method
Hazard statements
see section 16 : H222 - Extremely flammable aerosol H229 - Pressurised container: May burst if heated H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H332 - Harmful if inhaled H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled H335 - May cause respiratory irritation H351 - Suspected of causing cancer H373 - May cause damage to organs through prolonged or repeated exposure
Adverse physicochemical, human health and environmental effects
Pressurised container: May burst if heated. Extremely flammable aerosol. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure. Harmful if inhaled. May cause respiratory irritation. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled.
2.2 Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayExtra classification(s) to display
Hazard pictograms
GHS02 GHS07 GHS08
Signal word
Danger
Hazardous Ingredients
Isocyanic acid, polymethylenepolyphenylene ester
Precautionary statements
P102 - Keep out of reach of children P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking P211 - Do not spray on an open flame or other ignition source P251 - Do not pierce or burn, even after use P280 - Wear eye protection, face protection, protective clothing, protective gloves P284 - [In case of inadequate ventilation] wear respiratory protection P302+P352 - IF ON SKIN: Wash with plenty of water P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P342+P311 - If experiencing respiratory symptoms: Call a doctor, a POISON CENTER P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F P501 - Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation P261 - Avoid breathing spray, vapours, gas
Supplemental label elements
EUH204 - Contains isocyanates. May produce an allergic reaction Security closing plug for children : Not applicable Tactile warning : Applicable
2.3 Other hazards
No additional information available