Akona Polymer Modified Concrete Resurfacer

Hazard statements (CLP)

H315, H318, H350, H372

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

The most immediate and likely hazards are burns from dust in the eye. When the product is mixed with water, it will form an alkaline solution, which can cause skin irritation. Dust from the product is irritating to breathe. Prolonged overexposure to dust from the product is harmful to breathe, because it will contain crystalline silica. Applicable hazard statement based on cement content Danger. H318: Causes serious eye damage H315: Causes skin irritation Applicable hazard statement based on crystalline silica content Danger. H350: May cause cancer from inhaling dust. H372: Causes damage to respiratory system (silicosis) through prolonged or repeated exposure to inhaled dust. This product has been evaluated according to GHS and 29CFR1910.1200, Appendix A. It is categorized as a Health Hazard Carcinogen Category 1A, because it contains crystalline silica (quartz). It is categorized as a Health Hazard (serious eye damage/eye irritation - Category 1 and skin irritation – Category 2) because it contains Portland cement. Applicable Precautionary Statements: Based on crystalline silica content. P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe dusts. P270: Do not eat, drink or smoke when using this product. P280: Wear eye protection. P308+313/314. If exposed or concerns, or if you feel unwell: Get medical advice. P501: Dispose of contents in accord with local regulations. Based on cement content: P280: Wear skin and eye protection (water resistant protective gloves. Goggles recommended to prevent any dust in eyes). P264: Wash any exposed skin thoroughly after handling material P362+P364: Take off contaminated clothing and wash it before reuse. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P302+P352 IF ON SKIN wash with plenty of water P332+P313: If skin irritation occurs, get medical attention. P310: Immediately call a doctor if any eye irritation or discomfort develops

HMIS® ratings

Health: 1* Fire: 0 Reactivity: 0 HMIS® is a registered trademark of the National Paint and Coatings Association Section 3: Hazardous Ingredients/Composition Ingredient Typical Percentage CAS # Portland Cement ...................................... 20-40% 65997-15-1 Calcium aluminate cement ......................... 0-55% 65997-16-2 Silica Sand (as quartz) ............................. 60-75% 14808-60-7 Lime ............................................................. 0-7% 1305-78-8 Calcium carbonate ....................................... 0-4% 471-34-1 Polymeric binder .......................................... 0-4% * *Specific chemical identities and concentrations withheld as trade secret. They are available upon request to health professionals, employees and their designated representatives in accord with 29CFR1910.1200(i).