Note: Ingredients listed on restricted chemical lists
EC/CAS
202-851-5/100-42-5
Name of the chemical
Styrene ( Vinyl benzene )
Concentration
12.5-25%
EC/CAS
201-607-5/85-44-9
Name of the chemical
Phthalic anhydride
Concentration
<1%
EC/CAS
205-500-4/141-78-6
Name of the chemical
acetic acid, ethyl ester
Concentration
<1%
General Information
Revision date
2011-02-18
Product name
Poly-Soft
1.2.1 Relevant identified uses
Knife filler/ Surfacer
Emergency telephone
Department AKEMI chemisch technische Spezialfabrik GmbH
Icons in SDS
Company Information
company name
AKEMI chemisch technische Spezialfabrik GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
info@akemi.de, mail_D.Zimmermann@akemi.de
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H315, H319
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
CLP CLASSIFICATION
GHS02 flame Flam. Liq. 3 H226 Flammable liquid and vapour. GHS07 Skin Irrit. 2 H315 Causes skin irritation. Eye Irrit. 2 H319 Causes serious eye irritation.
EU Classification
Directive 67/548/EEC or Directive 1999/45/EC Xn; Harmful R20: Harmful by inhalation. Xi; Irritant R36/38: Irritating to eyes and skin. R10: Flammable. · Information concerning particular hazards for human and
Environmental hazards
Contact with skin and inhalation of aerosols/ vapours of the preparation should be avoided. Vapours of the product are heavier than air and may accumulate on the ground, in mines, drains or cellars with higher concentration. The product has to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version.
Classification system
The classification is according to the latest editions of the EU-lists, and extended by company and literature data. (Contd. of page 1)
Hazardous Ingredients
of labelling: Void · Labelling according to EU guidelines: The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials. · Code letter and hazard designation of product: Xn Harmful of labelling: styrene
Hazard statements
10 Flammable. 20 Harmful by inhalation. 36/38 Irritating to eyes and skin.
Precautionary statements
2 Keep out of the reach of children. 9 Keep container in a well-ventilated place. 13 Keep away from food, drink and animal feedingstuffs. 23 Do not breathe gas/fumes/vapour/spray. 25 Avoid contact with eyes. 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 29/56 Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. 46 If swallowed, seek medical advice immediately and show this container or label.
Special rules for supplemental label elements for certain mixtures
Contains phthalic anhydride. May produce an allergic reaction.
2.3 Other hazards
During processing and product hardening the network generator is released as fume. Consequently, take care for adequate air conditioning and for fume exhaustion on request.
PBT Substances
Not applicable.
vPvB Substances
Not applicable. *
