Note: Ingredients listed on restricted chemical lists
EC/CAS
231-548-0/7631-90-5
Name of the chemical
Sodium hydrogensulphite; Sodium bisulphite
Concentration
15-40
EC/CAS
231-791-2/7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
65-60
General Information
Revision date
2012-07-30
Product name
SODIUM BISULFITE SOLUTION
Chemical name
Sodium Bisulfite Solution
CAS No.
7631-90-5
1.2.1 Relevant identified uses
Antichlore in bleaching fibers and mordant in textile industry
1.2.2. Uses advised against
See chapter 16 for a general overview
Icons in SDS
Company Information
company name
AK-KİM KİMYA SAN. VE TİC. A.Ş
e-mail address of the competent person responsible for the Safety Data Sheet
ali.ketir@akkim.com.tr
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H302
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
CLP CLASSIFICATION
Acute toxicity (oral), Category 4
2.1 Classification of the substance or mixture
According to Regulation to 67/548/EC ⋅ Xn;R22 ⋅ R31
2.2 Label elements
According to Regulation (EC) No 1272/2008 [CLP1/GHS2] According to Regulation to 67/548/EEC
Hazardous Ingredients
Sodium bisulfite · Sodium bisulfite solution
Signal word
WARNING
Hazard statements
H302 Harmful if swallowed. According to the EC Regulation No. 67/548/EEC This product is classified as follows: · Xn;R22 · R31 R22 Harmful if swallowed R31 Contact with acids liberates toxic gas
Precautionary statements
General ⋅ None S7/9 Keep container tightly closed and in a well-ventilated place. S25 Avoid contact with eyes. S36 Wear suitable protective clothing. S46 If swallowed, seek medical advice immediately and show this container or label.
Prevention
P264 Wash thoroughly after handling. P270 Do not eat, drink or smoke when using this product.
Response
P301 + P312 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P330 Rinse mouth
Storage
None
Disposal
None
Supplemental label elements
Statements EUH031 Contact with acids liberates toxic gas.
Special rules for supplemental label elements for certain mixtures
None.
Additional information
Not Applicable 2.3.1. Skin Contact Directly skin contact or after time delayed may cause slight but significant inflammation. Repeated exposure may cause contact dermatitis which is characterized such as redness, swelling and blisters (blisters, blisters) symptoms. Open cuts, worn or irritated skin should not be exposed to this material. Entry ways to the bloodstream such as cuts, abrasions or lesions may cause create systemic damage with harmful effects. 2.3.2. Eye Contact Based on the available evidence or practical experience, suggested that, the material may cause eye irritation on significant number of people. Long-term eye contact may cause characterized as a temporary redness of the conjunctival inflammation (wind burn like). 2.3.3. Ingestion Accidental oral uptake of the material may be harmful. The experiments done on animals shows; less than 150 grams of oral intake amount may be fatal or cause serious damage to the person's health. Uptake of sulfide salts by mouth can cause irritation gastric (stomach). High doses can lead to severe colic (abdominal pain), diarrhea, circulatory disorders, depression and sometimes death of vital functions. 2.3.4. Inhalation Material may cause respiratory irritation in some people. Such a response to irritation of the body, can cause more lung damage. Inhalation of the steam or aerosols generated during the normal use of the material, can damage a person's health. 2.3.5. Long term effects Asthma-like symptoms, will continue months or even years after the end of exposure. The reason for this, reactive airways dysfunction syndrome (RADS) is non-allergic. The most important criteria for the diagnosis of RADS is a respiratory disease before and there a few minutes after exposure to irritants and non-atopic individuals with persistent asthma symptoms within hours, starts with a sudden. A reversible airflow pattern, on spirometry, with the presence of moderate to severe bronchialy perreactivity on methacholine challenge testing and the lack of minimal lymphocytic inflammation, without eosinophilia, have also been included in the criteria for diagnosis of RADS. RADS (or asthma)following an irritating inhalation is an infrequent disorder with rates related to the concentration of and duration of exposure to the irritating substance. Industrial bronchitis, on the other hand, is a disorder that occurs as result of exposure due to high concentrations of irritating substance (often particulate in nature) and is completely reversible after exposure ceases. The disorder is characterised by dyspnea, cough and mucus production ⋅ None
Environmental effects
No data available