Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
General Information
Revision date
2020-09-30
Product name
DRICORE PRO Concrete Repair Polyurethane Injection Expanding Foam
Product Synonyms
Polyamine
Chemical name
Isocyanate
1.2.1 Relevant identified uses
Epoxy Bonding Agent
Emergency telephone
CANUTEC 613 996 6666
Icons in SDS
Company Information
company name
agt products (ip) inc.
e-mail address of the competent person responsible for the Safety Data Sheet
info@dricore.com, info@dricore.comm
Section 2
SECTION 2: Hazards identification
NOTE: The classification, hazard statements and precautionary statements below represent those of Parts A and B mixed in a 1 to 1 ratio before hardening/curing.
Physical hazards
None Health and Environmental Hazards: Skin Damage/Irritation Category 2 Skin Sensitization Category 1 Respiratory Sensitization Category 1 Eye Damage/ Irritation Category 2 Acute Toxicity (Inhalation) Category 4 Carcinogen Category 2 Specific Target Organ Toxicity; Single Exposure (Resp) Category 3
Hazard statements
Harmful if inhaled. Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Suspected of causing cancer. May cause respiratory irritation.