Cymbaz Super

SECTION 2: Hazards identification

Physical hazards

Combustible liquid

Health hazards

irritant (eye, skin sensitization), Harmful (oral). Toxic (inhalation). FIRST-AID MEAUSRES: EYES: Flush with water for at least 15 minutes. If irritation occurs and persists, obtain medical attention. SKIN: Wash with plenty of soap and water. INGESTION: Drink 1 or 2 glasses of water and induce vomiting by touching the back of the throat with a finger. Never induce vomiting or give anything by mouth to an unconscious person. Contact a medical doctor. INHALATION: Remove to fresh air. If breathing difficulty or discomfort occurs and persists, contact a medical doctor. FIRE-FIGHING MEASURES: - EXTINGUISHING MEDIA: Foam, CO2 or dry chemical. Soft stream water fog only if necessary. Contain all runoff. FIRE / EXPLOSION HAZARDS: Slightly combustible. This material may support combustion at elevated temperatures. FIRE FIGHTING PROCEDURES: Isolate fire area. Evacuate downwind. Wear full protective clothing and self-contained breathing apparatus. Do not breathe smoke, gases or vapors generated. ACCIDENTAL RELEASE: RELEASE NOTES: Isolate and post spill area. Wear protective clothing and personal protective equipment. Keep unprotected persons and animals out of the area. Keep material out of lakes, streams, ponds and sewer drains. Large spills should be covered to prevent dispersal. For dry material, use a wet sweeping compound or water to prevent the formation of dust. If water is used, prevent runoff or dispersion of excess liquid by diking and absorbing with a non- combustible absorbent such as clay, sand or soil. Vacuum, shovel or pump all waste material, including absorbent, into a drum and label contents for disposal. To clean and neutralize spill area, tools and equipment, wash with a suitable solution of caustic or soda ash, and an appropriate alcohol (i.e., methanol, ethanol or isopropanol). Follow this by washing with a strong soap and water solution. Absorb, as above, any excess liquid and add to the drums of waste already collected. Repeat if necessary. PERSONAL PROTECTION/SAFTETY: EYES AND FACE: For dust exposure, wear chemical protective goggles or a face shield. RESPIRATORY: For dust exposure wear, as a minimum, a properly fitted half-face or full-face air-purifying respirator PROTECTIVE CLOTHING: Depending upon concentrations encountered, wear coveralls or long-sleeved uniform and head covering. For larger exposures as in the case of spills, wear full body cover barrier suit. Leather items - such as shoes, belts and watchbands - that become contaminated should be removed and destroyed. Launder all work clothing before reuse (separately from household laundry). GLOVES: Wear chemical protective gloves made of materials such as rubber, neoprene or nitrile. Thoroughly wash the outside of gloves with soap and water prior to removal. Inspect regularly for leaks. WORK HYGIENIC PRACTICES: Clean water should be available for washing in case of eye or skin contamination. Wash skin prior to eating, drinking or using tobacco. Shower at the end of the workday. HANDLING AND STORAGE: Store in a cool, dry, well-ventilated place. Do not use or store near heat, open flame or hot surfaces. Store in original containers only. Keep out of reach of children and animals. Do not contaminate other pesticides, fertilizers, water, food or feed by storage or disposal. STABILITY AND REACTIVITY HAZARDOUS REACTIONS (CONDITIONS TO AVOID) Stability: Stable under normal conditions. Hazardous polymerization: Will not occur. HAZARDOUS REACTIONS (MATERIALS TO AVOID) strong oxidizing agents HAZARDOUS DECOMPOSITION PRODUCTS Combustion products − Carbon dioxide, carbon monoxide. nitrogen oxides , sulfur oxides , ammonia . halogens , halogen acids , possible trace amounts of carbonyl halide .