Turan 10 SL

SECTION 2: Hazards identification

OSHA EMERGENCY OVERVIEW: Clear light yellow liquid with faint odor. May cause respiratory tract irritation. Toxic to bees. May cause adverse effects to the environment.

Principle Routes of Exposure

Inhalation: Vapor may be irritating to respiratory tract. Ingestion: Low hazard by swallowing. Skin contact: Non-irritating to the skin. Eye contact: Non-irritating to the eyes. Carcinogenicity: NTP: Not listed. IARC: Not listed. OSHA: Not regulated.

Medical Conditions Generally Aggravated by Exposure

No information found. FIRST-AID MEAUSRES: INHALATION: If you feel unwell, remove to fresh air immediately. Get medical attention if cough or other symptoms develop. EYE CONTACT: Immediately flush with plenty of water. Check for and remove contact lenses if easily possible. Get medical attention if irritation persists. SKIN CONTACT: Immediately remove contaminated clothing and shoes. Flush skin with large amounts of water, clean off with soap and water. Get medical attention if symptoms develop. INGESTION: Rinse mouth with water and give 1 or 2 glasses of water or milk. Get medical attention immediately. Induce vomiting as directed by medical personnel. Never give anything by mouth to an unconscious or convulsing person. FIRE-FIGHTING MEASURES: - Extinguishing media: Water jet, water fog, foam, dry chemical, CO2 Extinguishing media which must not be Not available. used: General hazard: No unusual fire or explosion hazard for normal industrial or commercial handling. Emits toxic fumes in fire condition. Firefighting instructions: Keep unnecessary and unprotected personnel away. Shut off supply if possible. Remove containers to safe place if possible. Keep surrounding areas cool by spraying water. Fight fire from an upwind position. Firefighting equipment: Respiratory and eye protection required for fire-fighting personnel. Full protective equipment and self- contained breathing apparatus (SCBA) should be used for all indoor fires and any significant outdoor fires. Hazardous combustion products: Carbon oxides, nitrogen oxides. ACCIDENTAL RELEASE MEASURE: PERSONAL PRECAUTIONS: Keep unnecessary and unprotected personnel away. Wear appropriate personal protective equipment as specified in Section 8. ENVIRONMENTAL Do not let this chemical enter the environment.

Precautionary statements

CLEAN-UP METHODS: Absorb or cover with dry earth, sand or other non-combustible material and transfer to sealable containers. Large spills: Dike far ahead of liquid spill for later disposal. HANDLING AND STORAGE: HANDLING: Technical Measures: Use in well-ventilated area. Avoid contact with eyes, skin, and clothing. Do not breathe vapor. Wear appropriate personal protective equipment. Provide hand and eye wash station near work area. Wash thoroughly after handling. Use under local exhaust or general ventilation. Remove contaminated clothing immediately.

Storage

Conditions Protect from direct sunlight. Store in cool, dark, and well- ventilated area. Keep container tightly closed. Store away from strong oxidizers. Packaging Material: Polyethylene or polyethylene-lined metal container. EXPOSURE CONTROLS/PERSONAL PROTECTION ENGINEERING Provide general ventilation. The use of closed CONTROLS: system or local exhaust ventilation is recommended. Provide safety shower and eye wash station near work area. EXPOSURE LIMITS: None is established for this substance. Personal protective equipment: Respiratory protection: Vapor respirator, supplied-air purifying respirator, breathing apparatus. Hand protection: Protective gloves Eye protection: Safety glasses or goggles. Protective clothing: Safety helmet, protective clothing, safety boots. PHYSICAL AND CHEMICAL PROPERTIES:

Appearance/Odor

Clear light yellow liquid. Faint odor. pH: 4.07 MELTING POINT: Not available. FLASH POINT: Not available. AUTOIGNITION TEMPERATURE: Not available. EXPLODABILITY: Not available. BULK DENSIITY: 1.07 At 20oC. SOLUBILITY IN WATER: Not available. The following information is for the components of this product. [Dinotefuran] pH: 5.6 (1% in water at 25oC) BOILING POINT: Decomposes. MELTING POINT: 107.5oC EXOTHERMIC ONSET TEMPERATURE: 217oC 111.5oC (by ARC test) AUTOIGNITION TEMPERATURE: 350oC EXPLODABILITY: Minimum Explosive Concentration: 50 mg/L Minimum Oxygen Concentration: 10 % VAPOR PRESSURE: <1.7×10-6 Pa at 30oC. DENSITY: 1.40 g/cm3 at 20oC. SOLUBILITY: 40 g/L in water at 20oC. 57 g/L in methanol at 20oC. 9.0×10-6 g/L in hexane at 20oC. Octanol/Water partition coefficient: 0.549 At 25oC. STABILITY AND REACTIVITY: STABILITY: Stable under ordinary conditions of use and storage. INCOMPATIBILITIES: Strong oxidizers, heat, sources of ignition. HAZARDOUS DECOMPOSITION Carbon oxides, nitrogen oxides in fire. PRODUCTS: HAZARDOUSPOLYMERIZATION: Will not occur.