Range covered by this MSDS

2.1 Classification of the substance or mixture

Compression moulded rubber product, Finished Article.

Signal word

None

Hazard statements

When used as designed, this product poses no safety or health hazards. This item is considered an article under (Article 3(3) REACH) and does not contain Substances which were identified as of very high concern (SVHCs) based on the criteria laid down in Article 57

Precautionary statements

None required. Use product as designed Section 3:Physical Properties

Appearance/Odor

Solid Material with light rubber odour Boiling Point (°C) N/A Specific Gravity 1.5 Maximum Vapour Density N/A Melting Point (°C) N/D Evaporation Rate N/A Solubility in Water (%) Not Soluble Volatile Matter (% Vol) N/D Vapour Pressure (mm of Hg) N/A PH N/A Section 4:Fire and Explosion Hazard Data Flammable Yes, when exposed to naked flame Flash Point (°C) N/D Method N/D Auto Ignition Temperature (°C) 195°C Flammable Limits (% Vol in Air) Lower Limit N/D Upper Limit N/D Extinguishing Media: Water Spray Foam Dry Chemical Special Fire Fighting Procedures Wear self contained breathing apparatus and suitable protective equipment Unusual Fire and explosion Hazards Fire Hazard when exposed to Flame. Thermal Degradation produces flammable hydrocarbon. Molten product causes burns when in contact with skin. Dense smoke, explosions hazard with flammable substances released. Section 5:Reactvity Data Stability Stable Conditions to Avoid None Hazardous Polymerization Will not occur Conditions to Avoid None known Incompatibility (materials to avoid) None known Hazardous Decomposition Products None Section 6:Preventative Measures Ventilation When heated provide adequate ventilation to remove smoke and fumes from work area Respiratory Protection None required with adequate ventilation Eye Protection Safety Glasses Hand Protection Gloves Other Protective Equipment None Handling Practice good personal Hygiene Storage Store in a Dry Cool Area Section 7:Spill or Leak Procedures Steps to be taken if material is released or spilled Reuse material or dispose Waste Disposal Method Follow Local, provincial and Federal/State Regulations. Recycle if possible. Section 8:Health Hazard Absorption Route Skin Eyes Inhalation Skin Contact not expected to be Harmful Eyes Not expected to be Harmful Inhalation Not expected to be Harmful Ingestion N/A