Torr Seal, Part Number 9530001 Part no. (chemical kit) : 9530001

Agilent Technologies, Inc

Revision date : 2024-04-03

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS09 GHS07 GHS08 GHS05 GHS06
Health risk rating 5
Safety risk rating 1
Environmental risk rating 4

Note: Ingredients listed on restricted chemical lists

EC/CAS

25068-38-6

Name of the chemical

4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane

Concentration

≥25-≤50

Listed in

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

≤10

EC/CAS

111-40-0

Name of the chemical

2,2'-iminodi(ethylamine)

Concentration

≥10-≤25

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

≥10-≤25

EC/CAS

140-31-8

Name of the chemical

2-piperazin-1-ylethylamine

Concentration

<1

Listed in

General Information

Revision date

2024-04-03

Product name

Torr Seal, Part Number 9530001 Part no. (chemical kit) : 9530001

Emergency telephone

1-800-424-9300

Icons in SDS

GHS05 GHS06 GHS07 GHS08 GHS09 T050

Company Information

company name

Agilent Technologies, Inc

GHS Information

Signal word

Agilent Torr Seal - part A - Epoxy

Hazard Codes

Hazard statements (CLP)

H314, H315, H317, H319, H330, H335, H350, H351, H360, H372, H411

Hazard statements

Code

Statements

H314

Causes severe skin burns and eye damage.

H315

Causes skin irritation

H317

May cause an allergic skin reaction

H319

Causes serious eye irritation

H330

Fatal if inhaled

H335

May cause respiratory irritation

H350

May cause cancer

H351

Suspected of causing cancer

H360

May damage fertility or the unborn child

H372

Causes damage to organs through prolonged or repeated exposure

H411

Toxic to aquatic life with long lasting effects

Section 2

SECTION 2: Hazards identification

(29 CFR 1910.1200) Classification of the substance or mixture

Hazard pictograms

Agilent Torr Seal - part A - Epoxy Resin Agilent Torr Seal - part B - Hardener

Signal word

Agilent Torr Seal - part A - Epoxy Warning Resin Agilent Torr Seal - part B - Danger Hardener

Hazard statements

Agilent Torr Seal - part A - Epoxy H315 - Causes skin irritation. Resin H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H335 - May cause respiratory irritation. H351 - Suspected of causing cancer. H411 - Toxic to aquatic life with long lasting effects. Agilent Torr Seal - part B - H314 - Causes severe skin burns and eye damage. Hardener H317 - May cause an allergic skin reaction. H330 - Fatal if inhaled. H350 - May cause cancer. H360 - May damage fertility or the unborn child. H372 - Causes damage to organs through prolonged or repeated exposure. H411 - Toxic to aquatic life with long lasting effects.

Prevention

Agilent Torr Seal - part A - Epoxy P201 - Obtain special instructions before use. Resin P280 - Wear protective gloves, protective clothing and eye or face protection. P273 - Avoid release to the environment. P261 - Avoid breathing vapor. P264 - Wash thoroughly after handling. Agilent Torr Seal - part B - P201 - Obtain special instructions before use. Hardener P280 - Wear protective gloves, protective clothing and eye or face protection. P284 - In case of inadequate ventilation wear respiratory protection. P273 - Avoid release to the environment. P260 - Do not breathe vapor. P270 - Do not eat, drink or smoke when using this product.

Response

Agilent Torr Seal - part A - Epoxy P391 - Collect spillage. Resin P308 + P313 - IF exposed or concerned: Get medical advice or attention. P304 + P312 - IF INHALED: Call a POISON CENTER or doctor if you feel unwell. P362 + P364 - Take off contaminated clothing and wash it before reuse. P363 - Wash contaminated clothing before reuse. P302 + P352 - IF ON SKIN: Wash with plenty of water. P333 + P313 - If skin irritation or rash occurs: Get medical advice or attention. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313 - If eye irritation persists: Get medical advice or attention. Agilent Torr Seal - part B - P391 - Collect spillage. Hardener P308 + P313 - IF exposed or concerned: Get medical advice or attention. P304 + P340, P310 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor. P301 + P310, P330, P331 - IF SWALLOWED: Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353, P310 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a POISON CENTER or doctor. P363 - Wash contaminated clothing before reuse. P302 + P352 - IF ON SKIN: Wash with plenty of water. P333 + P313 - If skin irritation or rash occurs: Get medical advice or attention. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313 - If eye irritation persists: Get medical advice or attention.

Storage

Agilent Torr Seal - part A - Epoxy P403 + P233 - Store in a well-ventilated place. Resin Keep container tightly closed. Agilent Torr Seal - part B - Not applicable. Hardener

Disposal

Agilent Torr Seal - part A - Epoxy P501 - Dispose of contents and container in Resin accordance with all local, regional, national and international regulations. Agilent Torr Seal - part B - P501 - Dispose of contents and container in Hardener accordance with all local, regional, national and international regulations.

Supplemental label elements

Agilent Torr Seal - part A - Epoxy Do not handle until all safety precautions have elements Resin been read and understood. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Agilent Torr Seal - part B - Do not handle until all safety precautions have Hardener been read and understood. Keep container tightly closed. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not breathe vapor or spray. Do not taste or swallow. Use only with adequate ventilation. Wash thoroughly after handling.

2.3 Other hazards

Hazards not otherwise Agilent Torr Seal - part A - Epoxy Polymerization is exothermic and can degenerate classified Resin into an uncontrolled reaction. Agilent Torr Seal - part B - Polymerization is exothermic and can degenerate Hardener into an uncontrolled reaction. Causes respiratory tract burns. Causes digestive tract burns.

2.1 Classification of the substance or mixture

OSHA/HCS status : Agilent Torr Seal - part A - This material is considered hazardous by the OSHA Epoxy Resin Hazard Communication Standard (29 CFR 1910.1200). Agilent Torr Seal - part B - This material is considered hazardous by the OSHA Hardener Hazard Communication Standard (29 CFR 1910.1200). Classification of the substance or mixture Agilent Torr Seal - part A - Epoxy Resin H315 SKIN IRRITATION - Category 2 H319 EYE IRRITATION - Category 2A H317 SKIN SENSITIZATION - Category 1 H351 CARCINOGENICITY - Category 2 H335 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract irritation) - Category 3 H411 AQUATIC HAZARD (LONG-TERM) - Category 2 Agilent Torr Seal - part B - Hardener H330 ACUTE TOXICITY (inhalation) - Category 2 H314 SKIN CORROSION - Category 1B H319 EYE IRRITATION - Category 2A H317 SKIN SENSITIZATION - Category 1 H350 CARCINOGENICITY - Category 1A H360 TOXIC TO REPRODUCTION - Category 1B H372 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 1 Section 2. Hazards identification H411 AQUATIC HAZARD (LONG-TERM) - Category 2 Ingredients of unknown : Agilent Torr Seal - part B - Percentage of the mixture consisting of ingredient toxicity Hardener (s) of unknown acute inhalation toxicity: 10 - 30% Agilent Torr Seal - part A - Epoxy Percentage of the mixture consisting of ingredient Resin (s) of unknown hazards to the aquatic environment: 5% Agilent Torr Seal - part B - Percentage of the mixture consisting of ingredient Hardener (s) of unknown hazards to the aquatic environment: 19.8%

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.