Pure7 Solution

2.1 Classification of the substance or mixture

Skin Corrosion 1, Eye Damage 1 , Corrosion 1

Signal word

Danger

Hazard statements

Causes severe skin burns and eye damage; May be corrosive to metals

Hazard pictograms

Corrosion

Prevention

Do not breathe dusts or mists. Wash hands, along with any other body parts that may have been exposed, thoroughly after handling. Wear protective gear to prevent contact with skin (Rubber gloves, aprons, slicker suit ) Wear eye protection/face protection (clear goggles and face shield) Keep only in original container.

Response

If swallowed: Rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower If inhaled: Remove person to fresh air and keep comfortable for breathing. Immediately call a physician Refer to first-aid measures (section 4) for any specific treatment If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical attention Absorb spillage to prevent material damage.

Storage

Store locked up. Store in compatible containers such as polypropylene , polyethylene, PVC, or 316 SS

Disposal

Dispose of contents/container in accordance with applicable regulations. May constitute hazardous waste if pH is less than 2. May also require consideration due to rate of corrosion of metal.

2.3 Other hazards

Ingestion or inhalation not recommended and could present hazards not otherwise classified. IARC has determined that occupational exposure to strong inorganic acid mists containing sulfuric acid is carcinogenic to humans. Sulfuric Acid mist is a non-genotoxic carcinogen; risk can be mitigated by maintaining exposure levels well below the irritation threshold, which is approximately 3-4 mg/m3. OSHA 8-hour PEL for sulfuric acid is 1mg/m3. Minimize creation of mists and assure adequate ventilation.