Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
N/A
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
EC/CAS
26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
N/A
General Information
Revision date
2006-07-27
Product name
KBS RustSeal
Manufacturer Name
Advanced Protective Technologies
Icons in SDS
Company Information
company name
Advanced Protective Technologies
Section 2
SECTION 2: Hazards identification
OSHA Hazards NFPA
WHMIS Classification
Transport Symbol Personal Protective (USA) (Canada) Equipment Consumer Product Not Regulated under WHMIS Classifications for workplace exposures: Not Regulated B3 D1A D2A, D2B Emergency Overview:
Appearance/Odor
Black liquid with solvent odor Harmful by inhalation. Irritating to eyes, respiratory system and skin. May cause sensitization by inhalation and skin contact. Toxic gases/fumes may be given off during burning or thermal decomposition. Closed container may forcibly rupture under extreme heat or when contents have been contaminated with water. USA: While this material is a Consumer Commodity, this MSDS contains valuable information critical to the safe handling and proper use of the product. This MSDS should be retained and available for employees and other users of this product. This product is a hazardous material as defined by 29 CFR1910.1200, OSHA Hazard Communication Evaluation. Canada: As packaged this product is intended for consumer use, subject to the labeling requirements of the CCCR. While this product is not regulated under WHMIS, this MSDS contains valuable information critical to the safe handling and proper use of the product. This MSDS should be retained and available for employees and other users of this product. Identification, continued
Potential health effects
ACUTE (short term): see Section 8 for exposure controls
Principle Routes of Exposure
Inhalation, Ingestion, Skin contact, Eye contact Inhalation: Short-term inhalation can cause respiratory and mucous membrane irritation. Symptoms include eye and nose irritation, dry or sore throat, runny nose, shortness of breath, wheezing and laryngitis. Coughing with chest pain or tightness may also occur, frequently at night. Mists or vapors can probably cause headache, nausea, dizziness, reduced concentration, incoordination and other symptoms of central nervous system (CNS) depression. Overexposure to vapors, above the exposure limits listed in Section 8, may lead to bronchitis, bronchial spasm, and pulmonary edema (fluid in the lungs). Chemical or hypersensitivity pneumonitis, with flu-like symptoms of fever and chills, may also occur. These symptoms may occur during exposure or may be delayed several hours. Ingestion: Harmful if swallowed; may cause lung damage if swallowed. Ingestion may cause severe irritation to the mouth and digestive system. May cause vomiting. Small amounts of this product drawn into the lungs during ingestion or vomiting could cause a potentially life- threatening accumulation of fluid (pulmonary edema). Ingestion is not a typical route of occupational exposure. Skin: Irritating to the skin with symptoms of reddening, itching, and swelling. Persons previously sensitized can experience allergic skin reaction with symptoms of reddening, itching, swelling, and rash. Cured material is difficult to remove. Contact with MDI can cause skin discoloration. Eye: Direct contact with the eyes may cause severe irritation including tearing, excess redness and swelling of the conjunctiva.
Long term hazards
see Section 11 for additional toxicological data Repeated or prolonged skin contact may cause dermatitis, with redness, blisters, cracking and swelling of the skin. Sensitization through inhalation or skin exposure: Individuals sensitized from prior contact to diisocyanates may experience asthma-like symptoms and/or skin reactions. Symptoms may include coughing, difficult breathing and a feeling of tightness in the chest. Effects may be delayed. Occasionally, breathing difficulty may be life threatening. Decreased lung function has been associated with overexposure to isocyanates. Long-term, high level exposure to organic solvents has been associated with a condition called "organic solvent syndrome". Symptoms such as excessive fatigue, reduced memory, pain and numbness in the legs, arms, hands and feet and behavioural changes have been observed in some people with long-term, high-level occupational exposure to organic solvents.
Medical Conditions Generally Aggravated by Exposure
Skin contact may aggravate an existing dermatitis. Asthma and other restrictive lung disorders, Exposure: skin allergies and eczema may be aggravated by exposure to this product.
Interactions with other chemicals
Not available.
Environmental effects
Not available. Do not allow the product to be released into the environment.