Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2019-04-30
Product name
ADVACAT FeSi Feedstock for MIM
Chemical name
Polymer/Metal Powder Composite
Icons in SDS
Company Information
company name
Advanced Metalworking Practices, LLC
Section 2
2.1 Classification of the substance or mixture
Not a hazardous substance or mixture.
2.2 Label elements
Not a hazardous substance or mixture.
2.3 Other hazards
Labeling of special preparations (GHS): AMPCATSDS.14 1 of 9 HEATING DURING PROCESSING OF PRODUCT MAY RESULT IN RELEASE OF THE DECOMPOSITION PRODUCT FORMALDEHYDE. MAY EMIT FORMALDEHYDE WHICH CAN CAUSE CANCER.
Potential health effects
Although there are no test data, there are no reported cases of any health problems from exposure to this product. As a normal precaution, excessive dusting or inhalation of fines should be avoided. Particle respirators should be worn if there is excessive dusting when handling the material. Thorough exhausting of fumes from hot material should be achieved to mitigate formaldehyde concentrations outside of OSHA limits which are governed by 29 CFR 1910.1048. If adequate ventilation cannot be achieved, organic vapor respirators with particulate prefilters should be utilized. See Section 8.2 for information on personal protective equipment (PPE).
