Problem Solver Select

SECTION 2: Hazards identification

NFPA Rating Classification of the substance or mixture

2.2 Label elements

Void

Hazard pictograms

Void

Signal word

Void

Hazard statements

Void

Classification system

• NFPA rating (scale 0 – 4) Health = 1 Fire = 0 Reactivity = 0 • HMIS-rating (scale 0 – 4) Health = 1 Fire = 0 Physical Hazard = 0

2.1 Classification of the substance or mixture

This product does not meet the criteria for classification as hazardous under the GHS and 29 CFR 1910.1200 • Label elements • GHS label elements Void • Hazard pictograms Void • Signal word Void • Hazard statements Void • Classification system: • NFPA rating (scale 0 – 4) Health = 1 Fire = 0 Reactivity = 0 • HMIS-rating (scale 0 – 4) Health = 1 Fire = 0 Physical Hazard = 0 3. Composition/information on ingredients • Chemical characterization: Mixtures • Description: Adhesive • Dangerous components: No hazardous/reportable components Cas # 7732-18-5 Water 31-48% • Trade name: Masterbond 188 5 4. First-aid measures • Description of first aid measures • After inhalation: Overexposure, remove to fresh air and seek medical attention. • After skin contact: Immediately wash with water and soap and rinse thoroughly. • After eye contact: Rinse opened eye for several minutes under running water. • After swallowing: Do not induce vomiting; immediately call for medical help. • Most important symptoms and effects, both acute and delayed: No further relevant information available. • Indication of any immediate medical attention and special treatment needed: No further relevant information available 5. Fire-fighting measures • Extinguishing media • Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray. Use fire fighting measures that suit the environment. • Special hazards arising from the substances or mixture: Dried solids can burn and release toxic fumes and vapors. • Advice for firefighters • Protective equipment: Protective clothing and respiratory protective device. 6. Accidental release measures • Personal precautions, protective equipment and emergency procedures Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation • Environmental precautions: Dilute with water. • Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust) Wash area thoroughly with water. Dispose of contaminated material as waste in accordance with federal state and local regulations. Ensure adequate ventilation. • Reference to other sections See section 7 for information on safe handling See section 8 for information on personal protection equipment See section 13 for disposal information 7. Handling and storage • Precautions for safe handling Avoid prolonged or repeated contact with skin. Avoid contact with eyes. Wash thoroughly after handling. • Information about protection against explosions and fires: No special measures required. • Conditions for safe storage, including any incompatibilities • Storage • Requirements to be met by store rooms and receptacles: Store above 40°F. Freeze-thaw stable up to five cycles at 20°F. • Information about storage in one common storage facility: Not required • Further information about storage conditions: Protect product from freezing. • Specific end use(s) No further relevant information available. 6 8. Exposure controls/personal protection • Additional information about design of technical systems: No further data; see item 7 • Control parameters • Components with limit values that require monitoring at the workplace: This product does not contain any relevant quantities of materials with critical values that have to monitor at the workplace. • Additional information: The lists that were valid during the creation were used as basis. • Exposure controls • Personal protective equipment (see listings below) • General protective and hygienic measures: The usual precautionary measures for handling chemicals should be followed. • Breathing equipment: Not necessary if room is well-ventilated • Protection of hands: Protective gloves The glove material has to be impermeable and resistant to the product/the substance/ the preparation. • Material of gloves: natural rubber • Eye protection: Safety glasses with side shields • Body protection: Protective work clothing 9. Physical and chemical properties • Information on basic physical and chemical properties • General Information • Appearance: Form: Heavy paste Color: Tan to light beige • Odor: Resinous • Odour threshold: Not determined •pH-value at 20°C (68°F): 9.3-10.8 • Change in condition Melting point: Undetermined Boling point: 212°F (100°C) • Flash point: Not applicable