AAT-542

Hazard statements (CLP)

H340, H350

Code

Statements

H340

May cause genetic defects

SECTION 2: Hazards identification

NFPA Rating Classification of the substance or mixture GHS08 Health hazard Muta. 1B H340 May cause genetic defects Carc. 1B H350 May cause cancer

2.2 Label elements

The product is classified and labeled according to the Globally Harmonized System (GHS).

Hazard pictograms

GHS08

Signal word

Danger

Hazardous Ingredients

Naphtha

Hazard statements

May cause genetic defects. May cause cancer.

Precautionary statements

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves/protective clothing/eye protection/face protection. IF exposed or concerned: Get medical advice/attention. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations.

Classification system

· NFPA ratings (scale 0 - 4) Health = 0 0 Fire = 0 0 Reactivity = 0 Trade name: AAT-542 (Contd. of page 1) · HMIS-ratings (scale 0 - 4) HEALTH *0 Health = *0 FIRE 0 Fire = 0 REACTIVITY 0 Reactivity = 0

PBT Substances

Not applicable

vPvB Substances

Not applicable

2.1 Classification of the substance or mixture

GHS08 Health hazard Muta. 1B H340 May cause genetic defects. Carc. 1B H350 May cause cancer. · Label elements · GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS). · Hazard pictograms GHS08 · Signal word Danger · Hazard-determining components of labeling: Naphtha · Hazard statements May cause genetic defects. May cause cancer. · Precautionary statements Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves/protective clothing/eye protection/face protection. IF exposed or concerned: Get medical advice/attention. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations. · Classification system: · NFPA ratings (scale 0 - 4) Health = 0 0 Fire = 0 0 Reactivity = 0 Trade name: AAT-542 (Contd. of page 1) · HMIS-ratings (scale 0 - 4) HEALTH *0 Health = *0 FIRE 0 Fire = 0 REACTIVITY 0 Reactivity = 0 · Other hazards · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. 3 Composition/information on ingredients · Chemical characterization: Mixtures · Description: Mixture of the substances listed below with nonhazardous additions. · Dangerous components: 57-13-6 urea 1.49% 8030-30-6 Naphtha 0.88% 4 First-aid measures · Description of first aid measures · After inhalation: Supply fresh air; consult doctor in case of complaints. · After skin contact: Generally the product does not irritate the skin. · After eye contact: Rinse opened eye for several minutes under running water. · After swallowing: If symptoms persist consult doctor. · Information for doctor: · Most important symptoms and effects, both acute and delayed No further relevant information available. · Indication of any immediate medical attention and special treatment needed No further relevant information available. 5 Fire-fighting measures · Extinguishing media · Suitable extinguishing agents: Use fire fighting measures that suit the environment. · Special hazards arising from the substance or mixture No further relevant information available. · Advice for firefighters · Protective equipment: No special measures required. 6 Accidental release measures · Personal precautions, protective equipment and emergency procedures Not required. · Environmental precautions: Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water. · Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation. Trade name: AAT-542 (Contd. of page 2) · Reference to other sections See Section 7 for information on safe handling. See Section 8 for information on personal protection equipment. See Section 13 for disposal information. · Protective Action Criteria for Chemicals · PAC-1: 57-13-6 urea 30 mg/m³ 8030-30-6 Naphtha 1,200 mg/m³ 9016-45-9 nonylphenolethoxylates 43 mg/m³ 1336-21-6 ammonia 61 ppm 79-20-9 methyl acetate 250 ppm · PAC-2: 57-13-6 urea 280 mg/m³ 8030-30-6 Naphtha 6,700 mg/m³ 9016-45-9 nonylphenolethoxylates 470 mg/m³ 1336-21-6 ammonia 330 ppm 79-20-9 methyl acetate 1,700 ppm · PAC-3: 57-13-6 urea 1,700 mg/m³ 8030-30-6 Naphtha 40,000 mg/m³ 9016-45-9 nonylphenolethoxylates 5,400 mg/m³ 1336-21-6 ammonia 2,300 ppm 79-20-9 methyl acetate 10000* ppm 7 Handling and storage · Handling: · Precautions for safe handling Ensure good ventilation/exhaustion at the workplace. · Information about protection against explosions and fires: No special measures required. · Conditions for safe storage, including any incompatibilities · Storage: · Requirements to be met by storerooms and receptacles: No special requirements. · Information about storage in one common storage facility: Not required. · Further information about storage conditions: None. · Specific end use(s) No further relevant information available. 8 Exposure controls/personal protection · Additional information about design of technical systems: No further data; see item 7. · Control parameters · Components with limit values that require monitoring at the workplace: 57-13-6 urea WEEL Long-term value: 10 mg/m³ 8030-30-6 Naphtha PEL Long-term value: 400 mg/m³, 100 ppm Trade name: AAT-542 (Contd. of page 3) REL Long-term value: 400 mg/m³, 100 ppm · Additional information: The lists that were valid during the creation were used as basis. · Exposure controls · Personal protective equipment: · General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Wash hands before breaks and at the end of work. Store protective clothing separately. · Breathing equipment: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air. · Protection of hands: Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation · Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. · Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye protection: Tightly sealed goggles 9 Physical and chemical properties · Information on basic physical and chemical properties · General Information · Appearance: Form: Fluid Color: According to product specification · Odor: Characteristic · Odor threshold: Not determined. · pH-value: Not determined. · Change in condition Melting point/Melting range: Undetermined. Boiling point/Boiling range: 100 °C (212 °F)