Note: Ingredients listed on restricted chemical lists
EC/CAS
84852-15-3
Name of the chemical
Nonylphenol (NP), mixed isomers
Concentration
N/A
EC/CAS
107-21-1
Name of the chemical
Ethane-1,2-diol
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
General Information
Revision date
2016-04-06
Product name
ULTRABOND HS-200 (Part B)
1.2.1 Relevant identified uses
Anchoring
Icons in SDS
Company Information
company name
ADHESIVES TECHNOLOGY CORP
GHS Information
Signal word
Danger
Section 2
2.1 Classification of the substance or mixture
OSHA Health Physical Environmental Skin Corrosion Cat 1 Not Classified Toxic to Aquatic Life Cat-2 Serious Eye Damage Cat 1 Reroductive Tox Cat 2 SkinSens Cat 1
2.2 Label elements
Danger: Corrosive to skin and eyes May cause skin sensitization Reproductive Toxicity EEmergency Overview Causes skin burns Causes severe eye damage Heated vapors can cause irritation Avoid contact with the skin and eyes Avoid breathing fume/gas/mist/vapors/spray Wear protective gloves/ protective clothing/ eye protection/ face protection Use outdoors or in a well-ventilated area
Principle Routes of Exposure
Eyes, skin and oral CCarcinogenicity This product or one of its ingredients present at 0.1% or more IS listed as a carcinogen or suspect carcinogen by NTP, IARC, Prop 65 or OSHA. This product contains crystalline silica (quarts sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to rrespirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, tthis classification is not relevant. Note: sanding of this product will create a possible silica dust hazard. ____________________________________________________________________________________________________ 33.
