ULTRABOND 2300 (Part B)

SECTION 2: Hazards identification

Part B)

2.1 Classification of the substance or mixture

Health Physical Environmental Skin Corrosion Cat 1B Not Classified Toxic to Aquatic Life Cat-2 Serious Eye Damage Cat 1 Carcinogen Cat 1A Reproductive toxicity Cat 2

2.2 Label elements

Danger: Corrosive to skin and eyes Reproductive toxicity Skin Irritant Emergency Overview Causes skin burns Causes severe eye damage May cause cancer Suspected of damaging fertility Wash skin thoroughly after handling Avoid breathing fume/gas/mist/vapors/spray Wear protective gloves/ protective clothing/ eye protection/ face protection Use outdoors or in a well-ventilated area Avoid contact during pregnancy/while nursing

Principle Routes of Exposure

Eyes, skin and oral Carcinogenicity This product or one of its ingredients present at 0.1% or more IS listed as a carcinogen or suspect carcinogen by NTP, IARC, Prop 65 or OSHA. This product contains crystalline silica (quarts sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of this product will create a possible silica dust hazard) ____________________________________________________________________________________________________