ULTRABOND 1 PART B

Adhesives Technology Corp

Revision date : 2021-07-05

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS09 GHS07 GHS08 GHS05
Health risk rating 5
Safety risk rating 1
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

84852-15-3

Name of the chemical

Nonylphenol (NP), mixed isomers

Concentration

≥10-≤25

EC/CAS

140-31-8

Name of the chemical

2-piperazin-1-ylethylamine

Concentration

<15

Listed in

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

≥1-≤3

EC/CAS

61788-44-1

Name of the chemical

Phenol, styrenated

Concentration

N/A

Listed in

General Information

Revision date

2021-07-05

Product name

ULTRABOND 1 PART B

1.2.1 Relevant identified uses

Anchoring epoxy

supplier name

Adhesives Technology Corp

Emergency telephone

(800) 255-3924 24/7

Icons in SDS

GHS05 GHS07 GHS08 GHS09 T031 T050

Company Information

company name

Adhesives Technology Corp

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H314, H317, H350, H361, H372, H410

Hazard statements

Code

Statements

H314

Causes severe skin burns and eye damage

Section 2

SECTION 2: Hazards identification

Signal word

Danger

Hazard statements

H314 - Causes severe skin burns and eye damage. H317 - May cause an allergic skin reaction. H350 - May cause cancer. H361 - Suspected of damaging fertility or the unborn child. H372 - Causes damage to organs through prolonged or repeated exposure. (respiratory tract) H410 - Very toxic to aquatic life with long lasting effects.

Prevention

P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P280 - Wear protective gloves, protective clothing and eye or face protection. P273 - Avoid release to the environment. P260 - Do not breathe dust. P270 - Do not eat, drink or smoke when using this product. P264 - Wash thoroughly after handling. P272 - Contaminated work clothing must not be allowed out of the workplace.

Response

P391 - Collect spillage. P308 + P313 - IF exposed or concerned: Get medical advice or attention. P304 + P340, P310 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor. P301 + P310, P330, P331 - IF SWALLOWED: Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT induce vomiting. P303 + P361 + P353, P310 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a POISON CENTER or doctor. P363 - Wash contaminated clothing before reuse. P302 + P352 - IF ON SKIN: Wash with plenty of water. P333 + P313 - If skin irritation or rash occurs: Get medical advice or attention. P305 + P351 + P338, P310 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.

Storage

P405 - Store locked up.

Disposal

P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations.

2.3 Other hazards

None known.

2.1 Classification of the substance or mixture

SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 1 SKIN SENSITIZATION - Category 1 CARCINOGENICITY - Category 1A TOXIC TO REPRODUCTION - Category 2 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 1 AQUATIC HAZARD (ACUTE) - Category 1 AQUATIC HAZARD (LONG-TERM) - Category 1 Carcinogenicity : This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of this product will create a possible silica dust hazard).

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.