Note: Ingredients listed on restricted chemical lists
EC/CAS
1477-55-0
Name of the chemical
1,3-benzenedimethanamine
Concentration
N/A
EC/CAS
84852-15-3
Name of the chemical
Nonylphenol (NP), mixed isomers
Concentration
N/A
EC/CAS
90-72-2
Name of the chemical
2,4,6-tris(dimethylaminomethyl)phenol
Concentration
N/A
EC/CAS
100-51-6
Name of the chemical
Benzyl Alcohol
Concentration
N/A
EC/CAS
108-95-2
Name of the chemical
Phenol
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
General Information
Revision date
2016-04-06
Product name
OEM-100 (Part B)
1.2.1 Relevant identified uses
Bonding & Coating
Emergency telephone
ADHESIVES TECHNOLOGY CORP
Icons in SDS
Company Information
company name
ADHESIVES TECHNOLOGY CORP
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
Part B)
2.1 Classification of the substance or mixture
Health Physical Environmental Skin Corrosion Cat 1B Not Classified Toxic to Aquatic Life Cat-2 Serious Eye Damage Cat 1 Reproductive Tox Cat 2 Carcinogen Cat 1A Acute Tox Oral Cat 3
2.2 Label elements
Danger: Corrosive to skin and eyes Toxic if swallowed Reproductive toxicity Skin Irritant Emergency Overview Causes skin burns Causes severe eye damage Suspected of damaging fertility May cause cancer Toxic if swallowed Wash skin thoroughly after handling Avoid breathing fume/gas/mist/vapors/spray Wear protective gloves/ protective clothing/ eye protection/ face protection Use outdoors or in a well-ventilated area Avoid contact during pregnancy/while nursing
Principle Routes of Exposure
Eyes, skin and oral Carcinogenicity This product or one of its ingredients present at 0.1% or more IS listed as a carcinogen or suspect carcinogen by NTP, IARC, Prop 65 or OSHA. This product contains crystalline silica (quarts sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of this product will create a possible silica dust hazard) ____________________________________________________________________________________________________