CRACKBOND CSR (Part A)

ADHESIVES TECHNOLOGY CORP

Revision date : 2016-04-29

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08
Health risk rating 5
Safety risk rating 5
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

30-50

EC/CAS

6846-50-0

Name of the chemical

2,2,4-trimethyl-1,3-pentanediol diisobutyrate

Concentration

20-40

EC/CAS

101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

10-20

General Information

Revision date

2016-04-29

Product name

CRACKBOND CSR (Part A)

1.2.1 Relevant identified uses

Concrete Repair

Emergency telephone

ADHESIVES TECHNOLOGY CORP

Icons in SDS

GHS07 GHS08

Company Information

company name

ADHESIVES TECHNOLOGY CORP

GHS Information

Signal word

Danger

Section 2

SECTION 2: Hazards identification

Part A)

2.1 Classification of the substance or mixture

Health Physical Environmental Acute Toxicity - Category 4 – Inhalation Not Classified Skin Irritation - Category 2 Eye Irritation - Category 2B Respiratory Sensitization - Category 1 Skin Sensitization - Category 1 STOT SE - Category 3 STOT RE - Category 2 - Inhalation

2.2 Label elements

Danger:

Hazard statements

Causes skin and eye irritation. May cause an allergic skin reaction. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause damage to organs (Respiratory Tract) through prolonged or repeated exposure if inhaled.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapors/spray. Wash skin thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves. Use personal protective equipment as required. In case of inadequate ventilation wear respiratory protection.

Response

IF ON SKIN: Wash with plenty of soap and water. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. If skin irritation or a rash occurs: Get medical advice/attention. If eye irritation persists: get medical advice/attention. Take off contaminated clothing and wash before reuse.

Storage

Store locked up. Store in a well ventilated place. Keep container tightly closed.

Disposal

Dispose of contents/container to appropriately licensed chemical waste/drum reclamation facilities. ____________________________________________________________________________________________________

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.