Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
General Information
Revision date
2018-08-18
Product name
CRACKBOND 2300 GEL (Part A)
1.2.1 Relevant identified uses
Bonding and Coating (Formally known as ULTRABOND 2300)
Emergency telephone
ADHESIVES TECHNOLOGY CORP
Icons in SDS
Company Information
company name
ADHESIVES TECHNOLOGY CORP
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
Part A)
2.1 Classification of the substance or mixture
Health Physical Environmental Skin Irritant Cat 2 Not Classified Toxic to Aquatic Life Cat-2 Eye Irritant Cat 2B Skin Sens 1 Carcinogen Cat 1A
2.2 Label elements
Warning: Eye Irritant Skin Irritant Skin Sensitizer Emergency Overview May cause skin sensitization Causes skin and eye irritation May cause cancer Wash skin thoroughly after handling Avoid breathing fume/gas/mist/vapors/spray Wear protective gloves/ protective clothing/ eye protection/ face protection Use outdoors or in a well-ventilated area
Principle Routes of Exposure
Eyes, skin and oral Carcinogenicity This product or one of its ingredients present at 0.1% or more IS listed as a carcinogen or suspect carcinogen by NTP, IARC, Prop 65 or OSHA. This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long-term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of this product will create a possible dust hazard). This product contains crystalline silica (quarts sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of this product will create a possible silica dust hazard) _________________________________________________________________________________________________