Note: Ingredients listed on restricted chemical lists
EC/CAS
931-328-0/7440-44-0
Name of the chemical
Carbon black
Concentration
01-211948884-
General Information
Version
4.0
Revision date
2023-06-13
Product name
AFA 4-dot S Extruded Activated Carbon, High Density Skeleton Thermal water steam activated carbon with a sugar basedbinder
Product name
AFA 4-dot S Extruded Activated Carbon, High Density Skeleton Thermal water steam activated carbon with a sugar basedbinder
Identification on the label/Trade name
AFA 4-dot S
CAS No.
7440-44-0
REACH No
01-2119488894-16-0018
1.2.1 Relevant identified uses
Use as an adsorbent in industrial, professional and consumer setting
1.2.2. Uses advised against
Currently no uses advised against have been identified
Emergency telephone
0049 (03996) 1597-0
Icons in SDS
Company Information
company name
AdFiS products GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
info@adfis.de
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Not classified
Additional information
No additional information is available. Information pertaining to special dangers for human and environment • No special dangers have been identified.
2.2 Label elements
As the substance is not classified as hazardous no hazard label is required.
2.3 Other hazards
As Extruded Activated Carbon – High Density Skeleton (HDS) is to be considered as an inorganic substance, the PBT assessment is not applicable. Heating, strong heating, ignition sources and contact with strong oxidizers such as ozone, liquid oxygen, chlorine, permanganate, etc., may result in fire. Wet activated carbon depletes oxygen from air and, therefore, dangerously low levels of oxygen may be encountered. Whenever workers enter a vessel containing activated carbon, the vessels oxygen content should be determined and work procedures for potentially low oxygen areas should be followed. This material may be self-heating under certain conditions (for example at high humidity). The uptake of humidity promotes the self-heating tendency. Big bags with activated carbon do not place on a wet underlay. Spent (or used) activated carbons may exhibit properties pertaining to the adsorbents.