Adam Hall Spray Adhesive

Hazard statements (CLP)

H222+P338, H229, H315, H319, H336, H412

SECTION 2: Hazards identification

Hazardous Ingredients

Acetone; 2-propanone, propanone Hydrocarbons, C7, n-alkane, isoalkane, cyclen Hydrocarbons, C6-C7, isoalkane, cyclen, <5% n-hexane Hydrocarbons, C6-C7, n-alkane, isoalkane, cyclen, <5% n-hexane • Hazard warnings H222 Extremely flammable aerosol. H229 Pressurized container: may burst if heated. H315 Causes skin irritation. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. • Safety information P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition sources. P251 Pressurized container: Do not pierce or burn, even after use. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Rinse thoroughly with water. P305+P351 IF IN EYES: Rinse cautiously with water for several minutes. Potentially +P338 Remove contact lenses, if present and easy to do. Rinse with water. P337+P313 If eye irritation persists: Seek medical advice/attention. P410+P412 Protect from sunlight and store at temperatures not exceeding 50°C/122°F.

2.3 Other hazards

Explosive/easily flammable mixtures may develop if there is insufficient ventilation and/or due to use.

2.1 Classification of the substance or mixture

• Classification per (EC) No. 1272/2008 Aerosol1 Aerosols Skin irritation. 2 Skin irritation Eye irrit. 2 Serious eye damage/eye irritation STOT single 3 Specific target organ toxicity (single exposure) Aqu. chron. 3 Hazardous to the aquatic environment