EverBlum Gold Cleaning Fluid

according to the federal final rule of hazard communication revised on 2012 (HazCom 2012)

Revision date : 2022-07-03

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 5

General Information

Version

2.0

Revision date

2022-07-03

Product name

EverBlum Gold Cleaning Fluid

CAS No.

156-60-5

Icons in SDS

GHS07 GHS08

Company Information

company name

according to the federal final rule of hazard communication revised on 2012 (HazCom 2012)

GHS Information

Signal word

Danger

Section 2

Classifications

Aspiration Hazard, Category 1 Skin Corrosion/Irritation, Category 2 Eye Damage/Irritation, Category 2A Acute Toxicity- Inhalation, Category 4 Specific Target Organ Toxicity (Single Toxicity), Category 3

Signal word

Danger

Hazard statements

Harmful if inhaled Causes skin irritation Causes serious eye irritation May cause drowsiness or dizziness May be fatal if swallowed and enters airways

Precautionary statements

Avoid breathing fume/mist/vapors/spray. Use only outdoors or in a well- ventilated area. Wash hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. If on skin: Wash with plenty of water/water and soap. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical advice/attention. If inhaled: Remove person to fresh air and keep comfortable for breathing. Call a poison center/doctor/.../if you feel unwell. If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Other hazards which do not result in classification

No other hazards are known. Spills of this product present a serious slipping hazard. 2.4. Unknown acute toxicity Not applicable 3.1. Substances Not applicable 3.2. Mixture Name

Product definition

Naphtha (petroleum), light alkylate (CAS No) 64741-66-8 40 - 50 Naphtha (petroleum), hydrotreated heavy (CAS No) 64742-48-9 20 - 30 Ethene, 1,2-dichloro-, (1E)- (CAS No) 156-60-5 30 - 40 Ethane, 1,1,2,2-tetrafluoro-1-(2,2,2-trifluoroethoxy)- (CAS No) 406-78-0 3 - 10 The specific chemical\ component identities and/or the exact component percentages of this material may be withheld as trade secrets. This information is made available to health professionals employees and designated representatives in accordance with the applicable provisions of

Further information

Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). 6.1. Personal precautions, protective equipment and emergency procedures General measures : Stop leak if safe to do so. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Avoid contact with skin and eyes. Evacuate personnel to safe areas. Danger of slipping by leaking/spilling product. Wear personal protective equipments as appropriate. 6.2. Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. Discharge into the environment must be avoided. 6.3. Methods and material for containment and cleaning up Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect all waste in suitable and labelled containers and dispose according to local legislation. Store away from other materials. Ensure all national/local regulations are observed. 6.4. Reference to other sections Refer to section 8 and 13. 7.1. Precautions for safe handling : Read label before use. Obtain special instructions before use. Obtain special instructions before use. Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal protective equipment. Hygiene measures : Do not eat, drink or smoke when using this product. Always wash hands after handling the product. 7.2. Conditions for safe storage, including any incompatibilities Storage conditions : Keep only in the original container in a cool well-ventilated place. Keep container tightly closed when not in use. Containers that are opened must be carefully resealed and kept upright to prevent leakage. Keep away from incompatible materials. Do not store at temperature above 120 °F (50 °C). Incompatible materials : Strong oxidizing agents. Incompatible condition : Avoid sources of ignition, heat and open flames. 7.3. Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated 8.1. Control parameters 1,2-trans-Dichloroethylene (156-60-5) ACGIH ACGIH TWA (ppm) 200 ppm ACGIH : Do not eat, drink or smoke during use. 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Clear Color : Colorless Odor : No dataavailable Odor threshold : No dataavailable pH : Notapplicable Relative evaporation rate (butyl acetate=1) : Not applicable Melting point : Notapplicable Freezing point : No data available Boiling point : 118 - 355 ºF (48 -179 ºC) estimated Flash point : > 200 ºF (93.3 ºC) closed cup Auto-ignition temperature : No dataavailable Decomposition temperature : No dataavailable Flammability (solid, gas) : Not applicable Vapor pressure : No dataavailable Relative vapor density at 20 °C : No dataavailable Relative density : 0.907 (water=1) Solubility : Negligible Log Pow : No dataavailable Log Kow : No dataavailable Viscosity, kinematic : No dataavailable Viscosity : No dataavailable Explosive properties : No dataavailable Oxidising properties : No dataavailable Explosive limits : Not applicable 9.2. VOC’s : 0.00% (v/v); 0.0 g/l (0.0 lbs/gal) Total VOC’s : 100.0% (v/v); 860.0 g/l (7.255 lbs/gal) Non-exempt VOC’s : 97.0% (v/v); 827.0 g/l (6.89 lbs/gal) 10.1. Reactivity No additional informationavailable 10.2. Chemical stability The product is stable at normal handling and storage condition 10.3. Possibility of hazardous reactions Under normal condition of use and storage, hazardous polymerization will not occur. 10.4. Conditions to avoid Exposure to high temperature may produce hazardous decomposition material. 10.5. Incompatible materials Strong oxidizing agents. 10.6. Hazardous decomposition products Thermal decomposition products: Carbon oxides, Hydrogen chloride gas, Hydrogen fluoride gas. 11.1. Information on toxicological effects Acute toxicity : Harmful if inhaled 1,2-trans-Dichloroethylene ( 156-60-5) LD50 oral rat > 5,000 mg/kg LD50 derman rabbit > 5,000 mg/kg LC50 inhalation (mg/l) - ATE 1.5 mg/l (mist) ATE (inhatation-mist) ca 3.75 – 4.0 mg/l (estimated) Skin corrosion/irritation : Causes skin irritation Serious eye damage/irritation : Causes serious eye irritation. Respiratory or skin sensitization : Notclassified Germ cell mutagenicity : Notclassified (Based on available data, the classification criteria are not met) Carcinogenicity : Not classified (No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, NTP or OSHA) Reproductive toxicity : Not classified (Based on available data, the classification criteria are not met) Specific target organ toxicity (single exposure) : May cause drowsiness or dizziness Specific target organ toxicity (repeated : Not classified exposure) (Based on available data, the classification criteria are not met) Aspiration hazard : May be fatal if swallowed and enters airways 12.1. Toxicity Ecology - general : The product is toxic to aquatic life with long lasting effects. 12.2. Persistence and degradability No additional information available 12.3. Bioaccumulative potential No additional information available 12.4. Mobility in soil No additional information available 12.5. Other adverse effects Effect on ozone layer : No additional information available Effect on the global warming : No additional information available 13.1. Waste treatment methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to comply with applicable local, national and international regulations. Waste treatment methods : Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Ecology - waste materials : Avoid release to the environment. In accordance with DOT Non-bulk containers only: Not DOT regulated for domestic transportation in containers with the capacity less than 119 gallons (450 liters) ADR Not regulated Transport by sea (IMDG) Not regulated Air transport (IATA/ ICAO) Not regulated Albatross does not recommend shipping any chemical products by air. Bulk containers only: Transport document description UN-No.(DOT) : UN3082 Environmentally hazardous substances, liquid, n.o.s. Naphtha (petroleum), 9, III Proper Shipping Name (DOT) : UN3082 : Environmentally hazardous substances, liquid, n.o.s. Transport hazard class(es) Naphtha (petroleum), (DOT) Hazard labels (DOT) : 9 - Class 9 - Miscellaneous hazardous material 49 CFR 173.140 : 9 - Class 9 (Miscellaneous dangerous materials) DOT Symbols Packing group (DOT) : G - Identifies PSN requiring a technical name : III - Minor Danger DOT Special Provisions (49 CFR 172.102) : 8 - A hazardous substance that is not a hazardous waste may be shipped under the shipping description “Other regulated substances, liquid or solid, n.o.s.”, as appropriate. In addition, for solid materials, special provision B54 applies 146 - This description may be used for a material that poses a hazard to the environment but does not meet the definition for a hazardous waste or a hazardous substance, as defined in 171.8 of this subchapter, or any hazard class as defined in Part 173 of this subchapter, if it is designated as environmentally hazardous by the Competent Authority of the country of origin, transit or destination. 173 - An appropriate generic entry may be used for this material. 335 - Mixtures of solids that are not subject to this subchapter and environmentally hazardous liquids or solids may be classified as “Environmentally hazardous substances, solid, n.o.s,” UN3077 and may be transported under this entry, provided there is no free liquid visible at the time the material is loaded or at the time the packaging or transport unit is closed. Each transport unit must be leakproof when used as bulk packaging IB3 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite (31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55 C (1.3 bar at 131 F) are authorized, except for UN2672 (also see Special Provision IP8 in Table 2 for UN2672). T4 - 2.65 178.274(d)(2) Normal ............. 178.275(d)(3) TP1 - The maximum degree of filling must not exceed the degree of filling determined by the following Degree of filling = 97 / (1 + a (tr - tf)) Where tr is the maximum mean bulk temperature during transport, and tf is the temperature in degrees celsius of the liquid during filling. TP29 - A portable tank having a minimum test pressure of 1.5 bar (150.0 kPa) may be used provided the calculated test pressure is 1.5 bar or less based on the MAWP of the hazardous materials, as defined in 178.275 of this subchapter, where the test pressure is 1.5 times the MAWP. DOT Packaging Exceptions (49 CFR 173.xxx) : 155 DOT Packaging Non Bulk (49 CFR 173.xxx) : 203 DOT Packaging Bulk (49 CFR 173.xxx) : 241 DOT Quantity Limitations Passenger aircraft/rail : No limit (49 CFR 173.27) DOT Quantity Limitations Cargo aircraft only(49 : No limit CFR 175.75) DOT Vessel Stowage Location : A - The material may be stowed ‘‘on deck’’ or ‘‘under deck’’ on a cargo vessel and on a passenger vessel.

Remarks

CNC impairment, eye irritation 8.2. Exposure controls Appropriate engineering controls : Ensure good ventilation of the work station. Eyewash fountains are suggested near any potential exposure. Use process enclosure, local exhaust ventilation or other engineering controls to keep workers exposure to the airborne contaminant below ant recommended limits. Personal protective equipment : Handle in accordance with good industrial hygiene and safety practices. Avoid all unnecessary exposure. For certain operations, additional Personal Protection Equipment (PPE) may be required. Protective goggles. Gloves. Insufficient ventilation: wear respiratory protection. Hand protection : In case of repeated or prolonged contact wear gloves. Eye protection : Wear goggles if splashing or spraying is anticipated. Skin and body protection : In case of repeated or prolonged exposure : Personal protective clothing should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling. Respiratory protection : In case of insufficient ventilation, wear suitable respiratoryequipment.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.