General Information
Revision date
2026-07-30
Product name
PED Safety Bag
1.2.1 Relevant identified uses
PED Safety Bag is intended for containing Thermal runaway events on a lithium-ion battery-powered portable electronic devices (PEDs), primarily for use with the passenger aviation industry
1.2.2. Uses advised against
uses not listed in the “identified uses” section above
Emergency telephone
+49 (0) 551-19240
Icons in SDS
Company Information
company name
Accenture GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
hw.customer-service@accenture.com
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture Physical Health Not Hazardous Not Hazardous
Principle Routes of Exposure
Inhalation (Acute): Exposure to glass fibers sometimes causes irritation of the skin. Less frequently irritation of the eyes, nose or throat may occur. Ingestion may cause short-term irritation of the stomach and intestines. (Chronic): There are no known health affects connected with long term use or contact with this product. See section 11 of SDS for toxicological information. The PED Safety Bag is a manufactured article. Hazard statements below describe potential exposure to fibers or particulates only in abnormal situations such as damage, misuse, or post-event handling after a thermal runaway. 2.3. Item description and other hazards The Article described by this MSDS is a fabric bag made of different material combinations which are needed in case of a Lithium-ion fire. It contains fire and temperature resistant materials based on Silica and aerogel. There are no regulated components within this product which contains hazardous material. Under conditions of normal use, it is unlikely that operators are exposed to any hazardous materials from this product. Normal use means that the Article remains enclosed in the under- pressure packaging and is only opened in case of an emergency Lithium-ion fire incident. The PED fire containment bag is intended to be used by a qualified/trained person in accordance with the use and instructions accompanying the product. The product is intended to be used for inhabited aircraft compartments and are to be used for one thermal runaway event only. Once the PED is secured inside the PED Bag, the bag needs to be transferred to a safe location away from passengers. Even when the Thermal runaway event is contained, the bag should not be opened until the flight has landed. While opening the bag, care should be taken to protect from exposure to toxic gases and harmful electrolytes which has severe health hazards. SECTION 3: Material Composition (Manufactured Article) The PED Safety Bag is a manufactured article composed of multiple solid materials. The information in this section is provided for material transparency purposes only and does not represent a substance or mixture composition under Regulation (EC) No. 1907/2006 (REACH), CLP, or other chemical classification regulations.
2.1 Classification of the substance or mixture
Physical Health Not Hazardous