NEUTRAL WAX Not available

SECTION 2: Hazards identification

Hazard labelling pursuant to EC Regulation 1272/2008 (CLP) and subsequent amendments and supplements. - CE50: Effective concentration (required to induce a 50% effect) Not applicable

2.1 Classification of the substance or mixture

8.1. Control parameters Does not meet the classification criteria for this hazard class The product is stable in normal conditions of use and storage. - CE NUMBER: Identifier in ESIS (European archive of existing substances) SECTION 5. Firefighting measures - CLP: EC Regulation 1272/2008 14.3. Transport hazard class(es) The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP). REPRODUCTIVE TOXICITY The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP). 10.3. Possibility of hazardous reactions 5.1. Extinguishing media - DNEL: Derived No Effect Level Information not available However, since the product contains hazardous substances in concentrations such as to be declared in section no. 3, it requires a safety data - EmS: Emergency Schedule However, since the product contains hazardous substances in concentrations such as to be declared in section no. 3, it requires a safety data Not applicable 8.2. Exposure controls sheet with appropriate information, compliant to (EU) Regulation 2015/830. Does not meet the classification criteria for this hazard class The vapours may also form explosive mixtures with the air. - GHS: Globally Harmonized System of classification and labeling of chemicals sheet with appropriate information, compliant to (EU) Regulation 2015/830. SUITABLE EXTINGUISHING EQUIPMENT 14.4. Packing group - IATA DGR: International Air Transport Association Dangerous Goods Regulation The extinguishing equipment should be of the conventional kind: carbon dioxide, foam, powder and water spray. 10.4. Conditions to avoid Hazard classification and indication: STOT - SINGLE EXPOSURE - IC50: Immobilization Concentration 50% Hazard classification and indication: UNSUITABLE EXTINGUISHING EQUIPMENT As the use of adequate technical equipment must always take priority over personal protective equipment, make sure that the workplace is -- - IMDG: International Maritime Code for dangerous goods None in particular. well aired through effective local aspiration. Not applicable Does not meet the classification criteria for this hazard class Avoid overheating. Avoid bunching of electrostatic charges. Avoid all sources of ignition. - IMO: International Maritime Organization When choosing personal protective equipment, ask your chemical substance supplier for advice.

2.2 Label elements

5.2. Special hazards arising from the substance or mixture

Environmental hazards

INDEX NUMBER: Identifier in Annex VI of CLP Personal protective equipment must be CE marked, showing that it complies with applicable standards. 10.5. Incompatible materials STOT - REPEATED EXPOSURE - LC50: Lethal Concentration 50% HAND PROTECTION Hazard labelling pursuant to EC Regulation 1272/2008 (CLP) and subsequent amendments and supplements. - LD50: Lethal dose 50% Hazard labelling pursuant to EC Regulation 1272/2008 (CLP) and subsequent amendments and supplements. HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE In the case of prolonged contact with the product, protect the hands with penetration-resistant work gloves (see standard EN 374). Not applicable Does not meet the classification criteria for this hazard class Information not available - OEL: Occupational Exposure Level Do not breathe combustion products. Work glove material must be chosen according to the use process and the products that may form. Latex gloves may cause sensitivity

Hazard pictograms

14.6. Special precautions for user

PBT Substances

Persistent bioaccumulative and toxic as REACH Regulation reactions. 10.6. Hazardous decomposition products

Aspiration hazard

PEC: Predicted environmental Concentration 5.3. Advice for firefighters SKIN PROTECTION

Signal word

PEL: Predicted exposure level Wear category I professional long-sleeved overalls and safety footwear (see Directive 89/686/EEC and standard EN ISO 20344). Wash body Not applicable Does not meet the classification criteria for this hazard class In the event of thermal decomposition or fire, gases and vapours that are potentially dangerous to health may be released. - PNEC: Predicted no effect concentration GENERAL INFORMATION with soap and water after removing protective clothing.

Hazard statements

14.7. Transport in bulk according to Annex II of Marpol and the IBC Code - REACH: EC Regulation 1907/2006 Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for EYE PROTECTION - RID: Regulation concerning the international transport of dangerous goods by train health. Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of Wear airtight protective goggles (see standard EN 166). EUH066

TOXICOLOGICAL INFORMATION

EUH210 Repeated exposure may cause skin dryness or cracking. Safety data sheet available on request. - TLV: Threshold Limit Value contaminated water used for extinction and the remains of the fire according to applicable regulations. RESPIRATORY PROTECTION Information not relevant Use this product according to good working practices. Avoid littering. Inform the competent authorities, should the product reach waterways or - TLV CEILING: Concentration that should not be exceeded during any time of occupational exposure. SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS None required, unless indicated otherwise in the chemical risk assessment. In the absence of experimental data for the product itself, health hazards are evaluated according to the properties of the substances it

Precautionary statements

contaminate soil or vegetation. - TWA STEL: Short-term exposure limit -- Normal fire fighting clothing i.e. fire kit (BS EN 469), gloves (BS EN 659) and boots (HO specification A29 and A30) in combination with ENVIRONMENTAL EXPOSURE CONTROLS contains, using the criteria specified in the applicable regulation for classification. SECTION 15. Regulatory information - TWA: Time-weighted average exposure limit self-contained open circuit positive pressure compressed air breathing apparatus (BS EN 137). The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure It is therefore necessary to take into account the concentration of the individual hazardous substances indicated in section 3, to evaluate the 12.1. Toxicity - VOC: Volatile organic Compounds compliance with environmental standards. toxicological effects of exposure to the product.

vPvB Substances

Very Persistent and very Bioaccumulative as for REACH Regulation 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture SECTION 6. Accidental release measures Information not available - WGK: Water hazard classes (German). 11.1. Information on toxicological effects On the basis of available data, the product does not contain any PBT or vPvB in percentage greater than 0,1%. SECTION 9. Physical and chemical properties 6.1. Personal precautions, protective equipment and emergency procedures Seveso Category - Directive 2012/18/EC: None 12.2. Persistence and degradability