Abesco FP200 FR Expanding Foam

Hazard statements (CLP)

H222, H229, H315, H317, H319, H332, H334, H335, H351, H373

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

NFPA Rating Classification of the substance or mixture

Hazard pictograms

GHS02 GHS07 GHS08

Signal word

Danger

Hazardous Ingredients

diphenylmethanediisocyanate, isomeres and homologues

Hazard statements

H222-H229 Extremely flammable aerosol. Pressurized container: May burst if heated. H332 Harmful if inhaled H315 Causes skin irritation. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction H351 Suspected of causing cancer. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary statements

P102 Keep out of the reach of children. P201 Obtain special instructions before use. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do no pierce or burn, even after use. P284 In case of inadequate ventilation wear respiratory protection (a protective mask with an appropriate gas filter – i.e. type A1 according to standard EN 14387). P280 Wear protective gloves/protective clothing/eye protection. P260 Do not breathe vapors/spray. P302+P352 IF ON SKIN: Wash with plenty of water/soap P305+351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50° C / 122 ° F. P501 Dispose of container in accordance with local/regional/national/international regulations.

Additional information

Persons already sensitized to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.

Results of PBT and vPvB assessment

PBT Not applicable vPvB Not applicable

Classification system

· NFPA ratings (scale 0 - 4) Health = 2 3 Fire = 3 2 3 Reactivity = 3 · HMIS-ratings (scale 0 - 4) Health = 2 Fire = 2 Reactivity = 3 ** NOTE: THIS INFORMATION IS BASED ON THE PRODUCT IN THE CAN WITH THE AEROSOL. **

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) No 1272/2008 Flam. Aerosol 1 H222-H229 Extremely flammable aerosol. Pressurized container. May burst if heated. Acute Tox. 4 H332 Harmful if inhaled. Skin Irrit. 2 H315 Causes skin irritation. Eye Irrit.2 H319 Causes serious eye irritation. Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin Sens. 1 H317 May cause an allergic skin reaction. Carc. 2 H351 Suspected of causing cancer. STOT SE 3 H335 May cause respiratory irritation. STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure.