Note: Ingredients listed on restricted chemical lists
EC/CAS
247-500-7/55965-84-9
Name of the chemical
Mixture of 5-chloro-2-methyl-2H- isothiazol-3-one (EINECS 247-500-7) and 2-methyl-2H-isothiazol-3-one (EINECS 220-239-6)
Concentration
0.0036%
EC/CAS
220-239-6
Name of the chemical
Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one 2-Methyl-2H-isothiazol-3-one
Concentration
N/A
General Information
Revision date
2025-11-18
Product name
ARCHITECT iVancomycin Microparticles
CAS No.
55965-84-9
1.2.1 Relevant identified uses
For In Vitro Diagnostic Use
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
Abbott Diagnostics
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H402, H412
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
(29 CFR 1910.1200) Classification of the substance or mixture
2.2 Label elements
The product is labelled according to the Globally Harmonized System (GHS)
Hazardous Ingredients
Reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H -isothiazol-3-one [EC no. 220-239-6] (3 1); reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-4- isothiazolin-3-one [EC no. 220-239-6] (3:1)
Hazard statements
H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
P261 Avoid breathing mist / vapors / spray. Product name: ARCHITECT iVancomycin Microparticles P272 Contaminated work clothing should not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection. P302+P352 If on skin: Wash with plenty of water. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents / container in accordance with local regulations.
Principle Routes of Exposure
Skin · Health: Sensitizer in contact with skin · Fire: Noncombustible · Reactivity: Minimal hazard - Stable, even in a fire. Not reactive with water. Not an oxidizer.
2.3 Other hazards
This product contains sodium azide. Sodium azide solutions are reported to: - react with acids to release hydrazoic acid, a very toxic gas. Higher quantities of hydrazoic acid are released as the solution becomes more acidic (i.e., as the pH of the solution gets lower). Low quantities of hydrazoic acid can be released from sodium azide in water. - react with certain metals (copper, lead, silver, brass) to form explosive metal azide compounds. Violent explosions have been reported during plumbing work on drain systems containing accumulations of azide on copper, lead, brass, or solder.
2.1 Classification of the substance or mixture
The classification was made according to U.S. OSHA 29 CFR 1910.1200 and 1910.1030 and applicable European regulations, and is expanded upon from supplier company and/or literature data. Sensitization - Skin 1 H317 May cause an allergic skin reaction. Aquatic Acute 3 H402 Harmful to aquatic life. Aquatic Chronic 3 H412 Harmful to aquatic life with long lasting effects. · Label elements · GHS label elements: The product is labelled according to the Globally Harmonized System (GHS). · Hazard pictograms: · Signal word: Warning · Hazard-determining components of labeling: Reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H -isothiazol-3-one [EC no. 220-239-6] (3:1); reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-4- isothiazolin-3-one [EC no. 220-239-6] (3:1) · Hazard statements: H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects. · Precautionary statements: P261 Avoid breathing mist / vapors / spray.