MasterMold 12-8A

Hazard statements (CLP)

H315, H317, H319, H332, H334, H335

Code

Statements

H315

Causes skin irritation

2.1 Classification of the substance or mixture

Acute Toxicity – Inhalation Category 4 Skin Irritation – Category 2 Eye Irritation Category 2A Respiratory Sensitization Category 1 Skin Sensitization Category 1 Carcinogenicity Category 2 Specific Target Organ Toxicity Single Exposure Category 3 (H335)

2.2 Label elements

Danger

Hazard statements

H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H332 Harmful if inhaled H334 May cause an allergy or asthma symptoms or breathing difficulties if inhaled H335 Suspected of causing cancer

Precautionary statements

P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing vapors or mist. P264 Wash thoroughly after handling. P280 Wear protective gloves, protective clothing, eye protection, and face protection. Page | 1 P285 In case of inadequate ventilation, wear respiratory protection. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue Rinsing. P304+P340 IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. P308+P313 IF exposed or concerned: Get medical attention. P362 Take off contaminated clothing and wash before reuse. P403+P233 Store in a well-ventilated place. Keep container tightly closed. P501 Dispose of contents and container in accordance with local, regional and national regulations.

Additional information

Individuals sensitized to isocyanates should discontinue use. Long-tern overexposure to isocyanates may cause lung damage. This is one part of a two-part system. Read and understand the hazard information on the Part B before using.