Baycofloor-EP3355, B-Component

SECTION 2: Hazards identification

Eye Hazards Causes eye irritation Skın Hazards May cause skın irritation Ingestion Hazards May be harmful ıf swallowed. Inhalation Hazards Harmful ıf inhaled,may affect the brain or nervous system,causing headache. 4- FIRST AID CRITERIA Eye Contact If material gets into eyes,flush with water immediately for 15 minutes.Consult a physician. Skın Contact In case of contact,wash skın immediately with soap and water. 02 Inhalatıon If inhaled,remove to fresh air.Administer oxygen ıf necessary.Colsult a physician ıf symptoms persist or exposure was severe. Ingestıon If swallowed do not ınduce vomiting.Seek immediate medical attention. 5- FIRE FIGHTING MEASURES Suitable extinguishing agents: CO2 ,extinguishing powder or water jet. Protective equipment: Wear self-contained breathing apparatus.

Additional information

Follow the emergency-plan 6- ACCIDENTAL RELEASE MEASURES Person-related safety precautions: Ensure adequate ventilation Do not breath in vapour. Avoid eye- and skin contact. Wear protective clothing. Measures for environmental protection: Build barriers with sand,soil or other sealings. Do not allow product to reach sewage system or water bodies. The product may not leak out in sewerage system,stretch of water or soil. Measures for cleaning/collecting: Absorb with liquid-binding,inflammable material(sand,acid binders,universal binder) See Section 8 for information on personal protection equipment. See Section 13 for information on disposal. See Section 7 for information on safe handling. 7- HANDLING AND STORAGE Handling: Keep containers tightly sealed.Do not get in eyes,on skin or on clothing.Wear personel protection equipment.Do not breathe vapors.Wash thoroughly after handing.If pouring or transferring materails,ground all containers and tools.Do not weld,heat,cut or drill on full or empty containers. Work with fresh air supply. Keep away from children.

Storage

Keep away from heat,sparks,open flames and oxidizing agents.Keep containers closed.Store in a cool,dry place. 02 8- EXPOSURE CONTROLS / PERSONAL PROTECTION Additional information about design of technical systems: It must be possible to wash the skin in the working area.Eye-wash bottle must be available. Components with critical values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. Personal Protective Equipment: -General protective and hyglenic measures Before starting work and after each break apply low-fat or fat-free skın cream on all uncovered parts of the body.Clean skın only with cleaning agent especially for epoxy resin.Don’t use solvent for skın cleaning.Wash hands during breaks and at the end of the work.Avoid contact with the eyes abd skın.Do not eat,drink or smoke while working. -Breathing equipmet Not necessary ıf room is well-ventilated. -Protection of hands Do not reuse one-way-gloves.Nitril-rubber-latex-gloves.The glove material has to be impermeable and resistant to the product/the substance/the preparation. -Eye protective Rack-goggles 9- PHYSICAL AND CHEMICAL PROPERTIES General Information Form Solid Colour Colourless Smell strong, characteristic Change in condition Melting point/Melting range Not determined Boiling point/Boiling range Not determined Flash point Not applicable Self-inflammability Product is not selfigniting. Danger of explosion Product is not explosive. Density 1,01 g/cm3 Solubility in / Miscibility with Water: not miscible or difficult to mix Viscosity 300 mpas 10- STABILITY AND REACTIVITY Conditions to avoid Heat,sparks and open flames. Incompatıbılıty Avoid contact with strong oxidizing agents. Hazardous Decomposition Products Carbon monoxide,nitrogen oxides and unidentified organic components.Consider all smoke and fumes from burning materail as very hazardous.Welding,cuttin or abrasive grinding can create smoke and fumes.Do not breathe any fumes or smoke from these operations. 02