Note: Ingredients listed on restricted chemical lists
EC/CAS
415-300-0/90076-65-6
Name of the chemical
Methanesulfonamide, 1,1,1-trifluoro-N-((trifluoromethyl)sulfonyl)-, lithium salt
Concentration
1-5 0.1-1
EC/CAS
202-510-0/96-49-1
Name of the chemical
ethylene carbonate
Concentration
N/A
EC/CAS
210-478-4/616-38-6
Name of the chemical
dimethyl carbonate
Concentration
N/A
EC/CAS
214-317-9/1120-71-4
Name of the chemical
1,3-Propanesultone
Concentration
N/A
General Information
Revision date
2017-03-29
Product name
Lithium Ion Cell, Phosphate-Based
Product Synonyms
High Power Lithium Ion Cell, Phosphate-Based
1.2.2. Uses advised against
of the power cells Synonyms
Manufacturer Name
A123 Systems LLC
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
A123 Systems LLC
GHS Information
Signal word
Environment and Development (UNCED) and Occupational Safety & Health
Section 2
SECTION 2: Hazards identification
(EC) No. 1272/2008 Not applicable under normal use in accordance with United Nations Conference on
2.1 Classification of the substance or mixture
Environment and Development (UNCED) and Occupational Safety & Health
Signal word
Environment and Development (UNCED) and Occupational Safety & Health
Hazard statements
Environment and Development (UNCED) and Occupational Safety & Health
Precautionary statements
P402: Store in a dry place. P410: Protect from sunlight. P501: Dispose of batteries in accordance with applicable hazardous waste regulations.
Classifications
burned. Exposure to the ingredients contained within or their combustion products could be harmful. European Communities (EC): This product is not classified as hazardous according to Regulation
Appearance/Odor
Solid object with no odor.
Principle Routes of Exposure
These chemicals are contained in a sealed enclosure. Risk of exposure occurs only if the cell is mechanically, thermally or electrically abused to the point of compromising the enclosure. If this occurs, exposure to the electrolyte solution contained within can occur by Inhalation, Ingestion, Eye contact and Skin contact.
Potential health effects
ACUTE (short term): see Section 8 for exposure controls In the event that this cell has been ruptured, the electrolyte solution contained within the cell would be corrosive and can cause burns to skin and eyes. Inhalation Inhalation of materials from a sealed cell is not an expected route of exposure. Vapors or mists from a ruptured cell may cause respiratory irritation. Ingestion Swallowing of materials from a sealed cell is not an expected route of exposure. Swallowing the contents of an open cell can cause serious chemical burns of mouth, esophagus, and gastrointestinal tract. Skin Contact between the cell and skin will not cause any harm. Skin contact with contents of an open cell can cause severe irritation or burns to the skin. Eye Contact between the cell and the eye will not cause any harm. Eye contact with contents of an open cell can cause severe irritation or burns to the eye.
Long term hazards
see Section 11 for additional toxicological data
Medical Conditions Generally Aggravated by Exposure
Not available Exposure
Interactions with other chemicals
Immersion in high conductivity liquids may cause corrosion and breaching of the cell enclosure. The electrolyte solution inside of the power cells may react with alkaline (basic) materials and present a flammable hazard
Environmental effects
Not available