ARC S7 (RD, WH) (Part A)

Hazard statements (CLP)

H315, H319, H335, H361d, H372

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

WHMIS 2015 Classification of the substance or mixture

Additional information

For full text of H-statements: see SECTIONS 2.2 and 16. Contains Cobalt bis(2-ethylhexanoate). May produce an allergic reaction

Signal word

Danger

Hazard statements

H226 Flammable liquid and vapour. H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H361d Suspected of damaging the unborn child. H372 Causes damage to hearing through prolonged or repeated exposure by inhalation.

Precautionary statements

P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground and bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/lighting equipment. P242 Use non-sparking tools. P243 Take action to prevent static discharges. P260 Do not breathe vapours/spray. P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves and eye/face protection. P303/361/353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. P304/340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305/351/338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308/313 IF exposed or concerned: Get medical advice/attention. P370/378 In case of fire: Use CO2, dry chemical, foam or water fog to extinguish. P403/235 Store in a well-ventilated place. Keep cool. P405 Store locked up. P501 Dispose of contents/container to an approved waste disposal plant.

Other hazards

The safety and health hazards are detailed separately for Part A and Part B. The final cured material is considered nonhazardous. Upon machining, refer to the precautions in the safety data sheets for Part A and Part B

2.1 Classification of the substance or mixture

2.1.1. Classification according to Regulation (EC) No 1272/2008 [CLP] / 29 CFR 1910.1200 / WHMIS 2015 / GHS Flammable liquid, Category 3, H226 Skin irritation, Category 2, H315 Eye irritation, Category 2, H319 Specific target organ toxicity – single exposure, Category 3, H335 Reproductive toxicity, Category 2, H361d Specific target organ toxicity – repeated exposure, Category 1, H372 (hearing, inhalation) 2.1.2. Australian statement of hazardous nature Hazardous according to criteria of Safe Work Australia. 2.1.3. Additional information For full text of H-statements: see SECTIONS 2.2 and 16.