Note: Ingredients listed on restricted chemical lists
EC/CAS
203-986-2/112-57-2
Name of the chemical
3,6,9-triazaundecamethylenediamine
Concentration
5-10
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
1-5
General Information
Revision date
2025-08-13
Product name
ARC S1PW (Part B)
1.2.1 Relevant identified uses
Potable water, erosion/corrosion resistant coating
supplier name
A.W. CHESTERTON COMPANY
Emergency telephone
1-800-535-5053, +1 352-323-3500
Icons in SDS
Company Information
company name
A.W. CHESTERTON COMPANY
e-mail address of the competent person responsible for the Safety Data Sheet
ProductSDSs@chesterton.com, customer.service@chesterton.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H318, H400, H410
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
(29 CFR 1910.1200) Classification of the substance or mixture
Additional information
For full text of H-statements: see SECTIONS 2.2 and 16. None
Signal word
Danger
Hazard statements
H318 Causes serious eye damage. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H410 Very toxic to aquatic life with long lasting effects.
Precautionary statements
P261 Avoid breathing mist/vapours. P264 Wash hands thoroughly after handling. P272 Contaminated work clothing must not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves and eye/face protection. P302/352 IF ON SKIN: Wash with plenty of soap and water. P305/351/338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER or doctor. P333/313 If skin irritation or rash occurs: Get medical advice/attention. P362/364 Take off contaminated clothing and wash it before reuse. P391 Collect spillage. P501 Dispose of contents/container to an approved waste disposal plant.
Other hazards
The safety and health hazards are detailed separately for Part A and Part B. The final cured material is considered nonhazardous. Upon machining, refer to the precautions in the safety data sheets for Part A and Part B
2.1 Classification of the substance or mixture
2.1.1. Classification according to Regulation (EC) No 1272/2008 [CLP] / 29 CFR 1910.1200 / WHMIS 2015 / Safe Work Australia / GHS Serious eye damage, Category 1, H318 Skin irritation, Category 2, H315 Skin sensitization, Category 1, H317 Hazardous to the aquatic environment, Acute, Category 1, H400 Hazardous to the aquatic environment, Chronic, Category 1, H410 2.1.2. Additional information For full text of H-statements: see SECTIONS 2.2 and 16.
