Note: Ingredients listed on restricted chemical lists
EC/CAS
100-51-6
Name of the chemical
Benzyl Alcohol
Concentration
N/A
EC/CAS
112-57-2
Name of the chemical
3,6,9-triazaundecamethylenediamine
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
General Information
Revision date
2019-06-28
Product name
ARC S1HB (Part B)
1.2.1 Relevant identified uses
For use as a high build coating on properly prepared surfaces where mild chemical and abrasion exposures are anticipated
supplier name
A.W. CHESTERTON COMPANY
Emergency telephone
24 hours per day, 7 days per week
Icons in SDS
Company Information
company name
A.W. CHESTERTON COMPANY
e-mail address of the competent person responsible for the Safety Data Sheet
ProductMSDSs@chesterton.com, customer.service@chesterton.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H314, H317, H318, H373, H400, H410
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
EU Classification
29 CFR 1910.1200 / WHMIS 2015 / GHS Acute toxicity, Category 4, H302 Skin corrosion, Category 1C, H314 Serious eye damage, Category 1, H318 Skin sensitization, Category 1, H317 Specific target organ toxicity – repeated exposure, Category 2, H373 (oral) Hazardous to the aquatic environment, Acute, Category 1, H400 Hazardous to the aquatic environment, Chronic, Category 1, H410 2.1.2. Australian statement of hazardous nature Hazardous according to criteria of Safe Work Australia.
Additional information
For full text of H-statements: see SECTIONS 2.2 and 16. None
Hazard statements
H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H373 May cause damage to organs through prolonged or repeated exposure if swallowed. H410 Very toxic to aquatic life with long lasting effects.
Precautionary statements
P260 Do not breathe mist/spray. P264 Wash hands thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P272 Contaminated work clothing must not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves/clothing and eye/face protection. P303/361/353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. P304/340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305/351/338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P301/330/331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P310 Immediately call a POISON CENTER or doctor. P314 Get medical advice/attention if you feel unwell. P363 Wash contaminated clothing before reuse. P391 Collect spillage. P405 Store locked up. P501 Dispose of contents/container to an approved waste disposal plant.
2.3 Other hazards
The safety and health hazards are detailed separately for Part A and Part B. The final cured material is considered nonhazardous. Upon machining, refer to the precautions in the safety data sheets for Part A and Part B.
