Note: Ingredients listed on restricted chemical lists
EC/CAS
500-033-5/25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
20-30
EC/CAS
219-371-7/2425-79-8
Name of the chemical
1,4-butanediol bis(2,3-epoxypropyl)ether
Concentration
1-5
EC/CAS
284-325-5/84852-15-3
Name of the chemical
Nonylphenol (NP), mixed isomers
Concentration
0.1-0.7
General Information
Revision date
2020-06-25
Product name
ARC MX1 (Part A)
supplier name
A.W. CHESTERTON COMPANY
Emergency telephone
1-800-535-5053, +1 352-323-3500
Icons in SDS
Company Information
company name
A.W. CHESTERTON COMPANY
e-mail address of the competent person responsible for the Safety Data Sheet
ProductSDSs@chesterton.com, customer.service@chesterton.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H318, H361f, H361fd, H411
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
WHMIS 2015 Classification of the substance or mixture
Signal word
Danger Danger
Hazard statements
H318 Causes serious eye damage. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H411 Toxic to aquatic life with long lasting effects. H318 Causes serious eye damage. H315 Causes skin irritation. H361fd Suspected of damaging fertility. Suspected of damaging the unborn child. H317 May cause an allergic skin reaction. H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
P273 Avoid release to the environment. P280 Wear protective gloves/clothing and eye/face protection. P310 Immediately call a POISON CENTER or doctor. P302/352 IF ON SKIN: Wash with plenty of soap and water. P333/313 If skin irritation or rash occurs: Get medical advice/attention. P305/351/338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P362/364 Take off contaminated clothing and wash it before reuse. P201 Obtain special instructions before use. P273 Avoid release to the environment. P280 Wear protective gloves/clothing and eye/face protection. P305/351/338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER or doctor. P302/352 IF ON SKIN: Wash with plenty of soap and water. P333/313 If skin irritation or rash occurs: Get medical advice/attention. P308/313 IF exposed or concerned: Get medical advice/attention. P362/364 Take off contaminated clothing and wash it before reuse.
Additional information
None None
2.3 Other hazards
This products contains a blocked polyisocyanate which is considered essentially unreactive at room temperature. Generation of free diisocyanate and blocking agent vapors is expected during any heating of this product above its unblocking temperature (120°C [248°F]). The safety and health hazards are detailed separately for Part A and Part B. During the curing process, alkylphenol will be split off. No isocyanate could be traced within the coating during curing. The final cured material is considered nonhazardous. Upon machining, refer to the precautions in the safety data sheets for Part A, Part B and Part C.
2.1 Classification of the substance or mixture
2.1.1. Classification according to Regulation (EC) No 1272/2008 [CLP] Serious eye damage, Category 1, H318 Skin irritation, Category 2, H315 Skin sensitization, Category 1, H317 Hazardous to the aquatic environment, Chronic, Category 2, H411 2.1.2. Classification according to 29 CFR 1910.1200 / WHMIS 2015 Serious eye damage, Category 1, H318 Skin irritation, Category 2, H315 Reproductive toxicity, Category 2, H361f Skin sensitization, Category 1, H317 Hazardous to the aquatic environment, Chronic, Category 2, H411 2.1.3. Australian statement of hazardous nature Hazardous according to criteria of Safe Work Australia. 2.1.4. Additional information For full text of H-statements: see SECTIONS 2.2 and 16.
