Note: Ingredients listed on restricted chemical lists
EC/CAS
500-033-5/25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
10-15
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
60-70
EC/CAS
7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
0.1 - 0.9
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
0.1-0.9
General Information
Revision date
2020-10-30
Product name
ARC MX FG (Part A)
supplier name
A.W. CHESTERTON COMPANY
Emergency telephone
1-800-535-5053, +1 352-323-3500
Icons in SDS
Company Information
company name
A.W. CHESTERTON COMPANY
e-mail address of the competent person responsible for the Safety Data Sheet
ProductSDSs@chesterton.com, customer.service@chesterton.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H412
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
WHMIS 2015 Classification of the substance or mixture
Additional information
For full text of H-statements: see SECTIONS 2.2 and 16. None
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
P264 Wash hands thoroughly after handling. P272 Contaminated work clothing must not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves and eye/face protection. P302/352 IF ON SKIN: Wash with plenty of soap and water. P333/313 If skin irritation or rash occurs: Get medical advice/attention. P305/351/338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337/313 If eye irritation persists: Get medical advice/attention. P362/364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents/container to an approved waste disposal plant.
Other hazards
The safety and health hazards are detailed separately for Part A and Part B. The final cured material is considered nonhazardous. Upon machining, refer to the precautions in the safety data sheets for Part A and Part B
2.1 Classification of the substance or mixture
2.1.1. Classification according to Regulation (EC) No 1272/2008 [CLP] / 29 CFR 1910.1200 / WHMIS 2015 / Safe Work Australia / GHS Skin irritation, Category 2, H315 Skin sensitization, Category 1, H317 Eye irritation, Category 2, H319 Hazardous to the aquatic environment, Chronic, Category 3, H412 2.1.2. Australian statement of hazardous nature Hazardous according to criteria of Safe Work Australia. 2.1.3. Additional information For full text of H-statements: see SECTIONS 2.2 and 16.
