Note: Ingredients listed on restricted chemical lists
EC/CAS
203-865-4/111-40-0
Name of the chemical
2,2'-iminodi(ethylamine)
Concentration
5-10
EC/CAS
202-859-9/100-51-6
Name of the chemical
Benzyl Alcohol
Concentration
1-5
EC/CAS
206-991-8/409-21-2
Name of the chemical
Silicon carbide
Concentration
10-15
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
10-20
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
1-5
EC/CAS
215-168-2
Name of the chemical
Iron Oxide Red
Concentration
1-5
General Information
Revision date
2012-11-26
Product name
ARC 897 (Part B)
supplier name
A.W. CHESTERTON COMPANY
Emergency telephone
1-800-535-5053, +1352-323-3500
Icons in SDS
Company Information
company name
A.W. CHESTERTON COMPANY
e-mail address of the competent person responsible for the Safety Data Sheet
ProductMSOSs@chesterton.com, customer.service@chesterton.com
Section 2
SECTION 2: Hazards identification
1999/45/EC Classification of the substance or mixture Classification according to Directive 1999/45/EC Corrosive; C; R34 R43 Canadian WHMIS classification E: Corrosive materials; 02B: Toxic materials causing other effects; 02A: Very toxic materials causing other effects Australian classification Hazardous according to criteria of Safe Work Australia Additional information For full text of R-phrases: see SECTIONS 2.2 and 16
2.2 Label elements
according to Directive 1999/45tEC
Hazard pictograms
C - Corrosive
R-phrase(s)
R34 Causes burns. R43 May cause sensitisation by skin contact.
S-phrase(s)
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28B After contact with skin, wash immediately with plenty of water. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Further information
None
2.3 Other hazards
The safety and health hazards are detailed separately for Part A and Part B. The final cured material is considered nonhazardous. © A.W. Chesterton Company, 2012 All Rights Reserved. ® Reg. US Patent and TM Office SDS No. 237B-12
2.1 Classification of the substance or mixture
of the substance or mixture 2.1.1. Classification according to Directive 1999/45/EC Corrosive; C; R34 R43 2.1.2. Canadian WHMIS classification E: Corrosive materials; 02B: Toxic materials causing other effects; 02A: Very toxic materials causing other effects 2.1.3. Australian classification Hazardous according to criteria of Safe Work Australia. 2.1.4. Additional information For full text of R-phrases: see SECTIONS 2.2 and 16.
