Note: Ingredients listed on restricted chemical lists
EC/CAS
111-40-0
Name of the chemical
2,2'-iminodi(ethylamine)
Concentration
10-15
EC/CAS
409-21-2
Name of the chemical
Silicon carbide
Concentration
30-40
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
<0.2
General Information
Revision date
2025-04-17
Product name
ARC 858 (Part B)
1.2.1 Relevant identified uses
ARC Polymer Composite. Repair damage caused by impact, abrasion or erosion and chemical attack
supplier name
A.W. CHESTERTON COMPANY
Emergency telephone
1-800-535-5053, +1 352-323-3500
Icons in SDS
Company Information
company name
A.W. CHESTERTON COMPANY
e-mail address of the competent person responsible for the Safety Data Sheet
ProductSDSs@chesterton.com, customer.service@chesterton.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H317
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
(29 CFR 1910.1200) Classification of the substance or mixture
Additional information
For full text of H-statements: see SECTIONS 2.2 and 16. None
Signal word
Danger
Hazard statements
H314 Causes severe skin burns and eye damage. H302 Harmful if swallowed. H317 May cause an allergic skin reaction.
Precautionary statements
P261 Avoid breathing vapours. P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P272 Contaminated work clothing must not be allowed out of the workplace. P280 Wear protective gloves/clothing and eye/face protection. P303/361/353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. P305/351/338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P301/330/331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P310 Immediately call a POISON CENTER or doctor. P333/313 If skin irritation or rash occurs: Get medical advice/attention. P363 Wash contaminated clothing before reuse. P405 Store locked up. P501 Dispose of contents/container to an approved waste disposal plant.
Other hazards
The safety and health hazards are detailed separately for Part A and Part B. The final cured material is considered nonhazardous. Upon machining, refer to the precautions in the safety data sheets for Part A and Part B
2.1 Classification of the substance or mixture
2.1.1. Classification according to 29 CFR 1910.1200 / WHMIS 2022 / Safe Work Australia / GHS Skin corrosion, Category 1B, H314 Serious eye damage, Category 1, H318 Acute toxicity, Category 4, H302 Skin sensitization, Category 1, H317 2.1.2. Additional information For full text of H-statements: see SECTIONS 2.2 and 16.