“1 SHOT �� ” Lettering Enamels (100-L through 199-L)

A Spraylat Company

Revision date : 2007-10-02

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS06
Health risk rating 1
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

8052-41-3

Name of the chemical

Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy

Concentration

N/A

Listed in

General Information

Revision date

2007-10-02

Product name

“1 SHOT �� ” Lettering Enamels (100-L through 199-L)

Product Synonyms

Nickel Antimony Titanium Rutile

Chemical name

“1 SHOT �� ” Lettering Enamels (100-L through 199-L)

CAS No.

8052-41-3

1.2.1 Relevant identified uses

THE ITEMS LISTED BELOW ARE NOT CONTAINED IN MOST ENAMELS. SEE TABLE ON PAGE 2 TO DETERMINE WHICH COLORS CONTAIN THESE INGREDIENTS AND % WT INGREDIENT NAME

Emergency telephone

1-800-424-9300

Icons in SDS

Company Information

company name

A Spraylat Company

e-mail address of the competent person responsible for the Safety Data Sheet

HSEcoordinator@Spraylat.com

Section 2

SECTION 2: Hazards identification

OSHA HMIS HEALTH 2 * 0 = Least 1 = Slight 2 = Moderate 3 = High 4 = Extreme FLAMMABILITY 2

Potential chronic health

REACTIVITY 0 ADDITIONAL INGREDIENTS OF LETTERING ENAMELS -- Weight % DENSITY V.O.C.‡ CARBON BLACK TITANIUM DIOXIDE BARIUM SULFATE 1,3,5- TRIMETHYL- BENZENE PARAFFINIC SOLVENT COPPER ZINC FERRIC OXIDE SILICON DIOXIDE (AMORPHOUS) ALUMINUM OXIDE OTHER PRODUCT# LBS/GL 100-L 10.6 3.4 < 1 101-L 11.6 3.0 <40 < 1 102-L 9.2 3.5 < 1 103-L 11.7 3.0 < 40 < 1 < 5 104-L 8.7 3.1 < 1 106-L 8.0 3.0 < 1 108-L 8.4 3.2 < 1 109-L 10.5 4.0 < 1 < 25 < 5 * 110-L 10.5 3.9 < 25 < 30 111-L 10.6 4.0 < 25 < 20 < 10 * 114-L 9.6 3.4 < 1 < 5 < 1 < 20 115-L 9.2 3.3 < 1 < 15 * 116-L 11.2 3.1 < 35 < 1 < 5 117-L 10.3 3.2 <0.0 < 20 < 1 < 5 118-L 11.3 3.0 < 35 < 1 < 5 120-L 11.8 3.0 < 40 < 1 < 5 124-L 10.5 3.6 < 1 130-L 11.3 3.5 <20 < 5 < 1 * 132-L 11.3 3.7 <15 < 5 < 1 * 134-L 11.0 3.7 <15 < 5 < 1 * 141-L 8.8 3.3 <15 < 5 < 1 142-L 9.4 3.5 < 5 < 1 * 143-L 8.6 3.4 <10 < 1 144-L 9.3 3.8 < 5 < 1 * 148-L 9.0 3.6 < 1 149-L 10.2 3.3 < 30 < 1 < 5 150-L 9.0 3.3 < 10 < 1 * 151-L 11.3 3.0 < 40 < 1 152-L 9.0 3.4 < 15 < 1 * 153-L 9.2 3.4 < 20 < 1 154-L 10.9 3.0 <0.0 < 35 < 1 < 5 155-L 8.2 3.5 < 5 < 1 156-L 8.3 3.3 < 5 < 1 157-L 8.8 3.3 < 15 < 1 158-L 8.3 3.0 < 1 < 5 < 1 160-L 9.4 3.3 < 20 < 1 < 5 161-L 8.3 3.2 < 5 < 1 162-L 8.2 3.5 < 5 < 1 163-L 8.8 3.3 < 15 < 1 164-L 8.7 3.3 < 15 < 1 165-L 8.3 3.4 < 5 < 1 * 168-L 11.2 3.6 < 35 < 1 < 5 191-L 11.0 3.4 < 20 < 1 193-L 8.8 4.0 < 1 < 30 * 195-L 9.6 3.2 < 1 < 20 < 1 < 5 199-L 7.8 <10 < 5 Carcinogenicity: IARC Yes No * NTP No * OSHA No * * See “List of Other Addtional Ingredients” at the end of this table for OTHER components. ‡ The VOC content is determined by using a percent solids basis, less water and exempt solvents, for adhesives, coatings and inks and the calculations of EPA Reference Method 24 or equivalent ASTM method approved by the executive office. * LIST OF OTHER ADDITIONAL INGREDIENTS PRODUCT# OTHER INGREDIENT CAS# PERCENT CARCINOGENICITY 109-L Solvent Naphtha (petroleum), medium aliphatic 64742-88-7 < 5 No 111-L Solvent Naphtha (petroleum), medium aliphatic 64742-88-7 < 5 No 114-L Talc 14807-96-6 < 5 No 115-L Crystalline Silica 14808-60-7 < 1 Yes (IARC, NTP only) 130-L Linseed Oil 8001-26-1 < 5 No 132-L Linseed Oil 8001-26-1 < 5 No 134-L Light Aliphatic Solvent Naphtha 64742-89-8 < 5 No Linseed Oil 8001-26-1 < 5 No 142-L Benzimidazolone Compound(s) TS16251056 < 5 No Calcium Carbonate 471-34-1 < 5 No Nickel Antimony Titanium Rutile 8007-18-9 < 5 No 144-L Benzimidazolone Compound(s) TS16251056 < 5 No Nickel Antimony Titanium Rutile 8007-18-9 < 5 No 148-L Benzimidazolone Compound(s) TS16251056 < 5 No Nickel Antimony Titanium Rutile 8007-18-9 < 5 No 150-L Calcium Carbonate 471-34-1 < 5 No 152-L Calcium Carbonate 471-34-1 < 5 No 156-L Polymerized Linseed Oil 67746-08-1 < 5 No 165-L Naphtha, hydrodesulfurized heavy 64742-82-1 < 5 No 193-L Aluminum 7429-90-5 <20 No Routes of Entry: Inhalation, Absorption, Ingestion, Skin contact, Eye contact.

Medical Conditions Generally Aggravated by Exposure

Eye disease, Skin disease including eczema and sensitization, Kidney disease, Liver disease, Digestive tract disease, Lung disease. Immediate (Acute) Health Effects: Inhalation: Can cause moderate respiratory irritation, dizziness, weakness, fatigue, nausea and headache. This product may cause metal fume fever with resulting flu-like symptoms. Can cause severe central nervous system depression (including unconsciousness). Skin Contact: Can cause moderate skin irritation, defatting, and dermatitis. Eye Contact: Can cause moderate irritation, tearing and reddening, but not likely to permanently injure eye tissue. Skin Absorption: May cause irritation and minor systemic damage. Ingestion: Toxic if swallowed. May cause target organ failure and/or death. Can cause abdominal discomfort, nausea, vomiting and diarrhea. Aspiration of material into the lungs can cause chemical pneumonitis. Target Organ Acute Toxicity: Eyes, Skin, Respiratory System, Kidneys, Nervous System, Blood, Liver, Digestive Tract, Thyroid, Pituitary, Testes Stomach, Cardiovascular System, Bone Marrow, Lymphatic System. Long-Term (Chronic) Health Effects: Inhalation: Upon prolonged and/or repeated exposure, can cause moderate respiratory irritation, dizziness, weakness, fatigue, nausea and headache. Skin Contact: Upon prolonged or repeated contact, can cause moderate skin irritation, defatting, and dermatitis. Not likely to cause permanent damage. Eye Contact: Upon prolonged or repeated contact, can cause moderate irritation, tearing and reddening, but not likely to permanently injure eye tissue. Skin Absorption: Upon prolonged or repeated exposure, harmful if absorbed through the skin. May cause severe irritation and systemic damage. Carcinogenicity: IARC classifies ethylbenzene as “possibly carcinogenic to humans” (2B). See Tables on pages 2 and 3 for information on other components. Target Organ Chronic Toxicity: Nervous System, Eyes, Skin, Respiratory System, Kidneys, Blood, Liver, Digestive Tract, Pituitary, Testes, Stomach, Cardiovascular System, Lymphatic System. NOTICE - Reports have associated repeated and prolonged occupational overexposure to solvents with brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Lifetime inhalation exposure of rats and mice to high concentrations of ethylbenzene (750 ppm) resulted in increases in certain types of cancer, including kidney, lung and liver tumors. Testicular adenomas were increased as were thyroid effects in rats at 750 ppm. Pituitary effects were observed in female mice at 250 ppm. These effects were absent when exposure was below 75 ppm ethylbenzene. The study does not address the relevance of these results to humans. IARC has recently re-evaluated titanium dioxide as possibly carcinogenic to humans (Group 2B) based on animal studies. However, human studies available to date do not suggest that occupational exposure to titanium dioxide increases cancer risk. The ACGIH classifies titanium dioxide as A4 (not classifiable as a human carcinogen). NTP does not classify it as carcinogenic. IARC's evaluation shows inadequate evidence of carcinogenicity in humans, but sufficient evidence of carcinogenicity in experimental animals. The evidence shows that high concentrations of powdered and ultrafine titanium dioxide dust caused respiratory tract cancer in rats exposed by either natural inhalation or direct introduction into the lungs. However, the same results are observed in people working in dusty environments. Therefore, IARC extended this idea to workers with exposures to titanium dioxide dust, if there are insufficient dust control measures in place. Based on the IARC decision, Canadian officials have agreed that titanium dioxide is classifiable as WHMIS D2A (carcinogen), and that it is not necessary to wait for release of the full monograph. OSHA requires the status on US MSDSs to change within 90 days of publication in the IARC monograph volume 93. Cutting, sanding or grinding dried or cured material may release particles of crystalline silica (quartz). Exposure to airborne particles may cause lung damage including a risk of cancer. Chronic exposure may result in chest pain, difficulty breathing, lung damage and silicosis. (Silicosis is the permanent deposition of silica in lung tissue that results in lung damage.) There may exist a relationship between silicosis and certain cancers. This product contains pigments which may become a dust nuisance when removed by abrasive blasting, sanding or grinding. See additional information above in this section for products containing Crystalline Silica. IV. FIRST AID Inhalation: Remove to fresh air. If breathing is difficult, have a trained individual administer oxygen. If not breathing, give artificial respiration and have a trained individual administer oxygen. Get medical attention immediately.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.