DRY LUBE

Aspiration hazard

Category 1 (Asp. Tox. 1, H304) This mixture does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use.

2.2 Label elements

The mixture is an aerosol fitted with a sealed spray attachment.

Hazard pictograms

GHS02

Signal word

DANGER

Hazard statements

H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. EUH066 Repeated exposure may cause skin dryness or cracking.

Precautionary statements

P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. Disposal P501 Dispose of contents / container in accordance with local / regional / national / international regulations.

Prevention

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment.

Storage

P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 °C/122 °F.

2.3 Other hazards

The mixture does not contain substances classified as 'Substances of Very High Concern' (SVHC) >= 0.1% published by the European CHemicals Agency (ECHA) under article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table The mixture fulfils neither the PBT nor the vPvB criteria for mixtures in accordance with annexe XIII of the REACH regulations EC