Note: Ingredients listed on restricted chemical lists
EC/CAS
618-498-9***/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
30-60 602-095-
EC/CAS
287-477-0/85535-85-9
Name of the chemical
Alkanes, C14-17, chloro
Concentration
≥30
EC/CAS
200-857-2/75-28-5
Name of the chemical
iso-Butan, enthält 0,1% Butadien
Concentration
5-10
EC/CAS
618-498-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
30-60 602-095-
General Information
Version
2022 EN
Revision date
2022-07-21
Product name
637000000 / 11531 - PU FOAM X60 *Internal recipe UFI code
1.2.1 Relevant identified uses
Bonding and sealing Uses not recommended: other than the above
Emergency telephone
0344 892 0111, +353 1 809 2566, +353 1 809 2166
Icons in SDS
Company Information
company name
A.M.P.E.R.E. SYSTEM
e-mail address of the competent person responsible for the Safety Data Sheet
fds@amperesystem.com
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H222, H229, H315, H317, H319, H332, H334, H335, H351, H362, H373, H400, H410
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
SECTION 2: Hazards identification
(EC) No. 1272/2008 Classification of the substance or mixture
Contains
Diphenylmethanediisocyanate, isomers and homologues; alkanes, C14-17, chloro Information according to Commission REGULATION (EC) No 552/2009 of 22 June 2009, that must appear on the label of the product. Persons already sensitized to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. Information according to Commission Regulation (EC) No. 2020/1149, which must appear on the label of a product containing diisocyanates in a concentration ≥ 0.1% As from 24 August 2023 adequate training is required before industrial or professional use.
2.3 Other hazards
Medium chain chlorinated paraffins (MCCP) [UVCB substances consisting of more than or equal to 80% of linear chloroalkanes with a carbon chain length ranging from C14 to C17]: the substance has been included in the Candidate List for possible inclusion in Annex XIV of REACH. (published in accordance with Article 59 (10) of the REACH Regulation) Reason for inclusion: PBT (Article 57d); vPvB (Article 57e)
Further information
Not to be used in a range of ignition sources. Further information necessary to be added to the product label complying with other regulations, see Section 15.
2.1 Classification of the substance or mixture
2.1.1 Classification according to EU Regulation no. 1272/2008 Aerosol 1 H222, H229 Skin Irrit. 2 H315 Skin Sens. 1 H317 Eye Irrit. 2 H319 Acute Tox. 4 H332 Resp. Sens. 1 H334 STOT SE 3 H335 Carc. 2 H351 STOT RE 2 H373 Lact. H362 Aquatic Chronic 1 H410 Aquatic Acute 1 H400 The full text of “H-phrases” is stated in Section 16 of this Safety Data Sheet. Classification notes: Note: The calculation method takes into account the requirements of the CLP Regulation for the classification of aerosols in line with paragraph 1.1.3.7 of Annex I, Part 1, CLP. 2.1.2 The most serious adverse physic-chemical effects Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Build-up of explosive mixtures possible without sufficient ventilation. 2.1.3 The most serious adverse effects on human health Harmful if inhaled. May cause damage to organs through prolonged or repeated exposure. Causes serious eye irritation. May cause respiratory irritation. Causes skin irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Suspected of causing cancer. May cause harm to breast-fed children. Persons with airways hypersensitivity (e.g. asthma, chronic bronchitis) must not come into contact with the product. Symptoms may also occur with overexposure airways after a few hours. Dust, vapours and aerosols are harmful to respiratory tract. 2.1.4 The most serious adverse effects on the environment Very toxic to aquatic life with long lasting effects.