Note: Ingredients listed on restricted chemical lists
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
10-30
EC/CAS
822-06-0
Name of the chemical
Hexamethylene diisocyanate
Concentration
<0.05
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
<10
General Information
Revision date
2021-08-02
Product name
Vitrethane V633 Pack B
Product name
Vitrethane V633 Pack B
Identification on the label/Trade name
VITRETHANE V633 PACK B
1.2.1 Relevant identified uses
Component of a two-pack coating used for long term decoration and protection of solid substrates, spray or roller applied. This SDS must be read in conjunction with SDS for VITRETHANE V633 Pack B
Emergency telephone
61 3 8769 0291
Icons in SDS
Company Information
company name
A&I Coatings Pty Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
helpdesk@aicoatings.com
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H225, H312, H315, H320, H332, H335
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Hazard statements
This product is classified as: Xn, Harmful. Xi, Irritating. F, Flammable. Flammable liquids Category 2, Acute Toxicity Dermal Category 4, Skin Irritation Category 2, Eye irritation Category 2B, Acute Toxicity Inhalation Category 4, Specific Target Organ Toxicity - Single Exposure Category 3 Hazardous according to the criteria of SWA. Dangerous according to Australian Dangerous Goods (ADG) Code, IATA and IMDG/IMSBC criteria. H225: Highly flammable liquid and vapour. H312: Harmful in contact with skin. H315: Causes skin irritation. H320: Causes eye irritation. H332: Harmful if inhaled. H335: May cause respiratory irritation.
SUSMP Classification
S6
ADG classification
Class 3 Flammable liquids
UN Number
1263, PAINT
Signal word
DANGER
Prevention
P210: Keep away from heat, sparks, open flames, and hot surfaces. - No smoking. P233: Keep container tightly closed. P241: Use explosion-proof electrical ventilating, lighting, and other equipment. P242: Use only non-sparking tools. P261: Avoid breathing fumes, mists, vapours or spray. P262: Do not get in eyes, on the skin, or clothing. P264: Wash contacted areas thoroughly after handling. P271: Use only outdoors or in a well-ventilated area. P280: Wear protective gloves, protective clothing and eye or face protection.
Response
P363: Wash contaminated clothing before reuse. P301+P330+P331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting P303+P361+P353 IF ON SKIN (or hair) Remove immediately all contaminated clothing. Rinse skin with water P304+P340 IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 If exposed or concerned Get medical advice P332+P313 If skin irritation occurs Get medical advice P337+P313 If eye irritation persists Get medical advice P381: Eliminate all ignition sources if safe to do so. P370+P378: In case of fire, use carbon dioxide, dry chemicals, foam. Alcohol resistant foam is the preferred firefighting medium but, if it is not available, normal foam can be used.
Storage
P402+P404: Store in a dry place. Store in a closed container. P403+P235: Store in a well-ventilated place. Keep cool.
Disposal
P501: If they can not be recycled, dispose of contents to an approved waste disposal plant and containers to landfill (see Section 13 of this SDS). Emergency Overview Physical Description & Colour: Clear mobile liquid Odour: Characteristic solvent odour.
Health hazards
Skin, eyes and respiratory irritation, headaches, dizziness, vertigo and nausea. SWA has released a document entitled GUIDELINES FOR HEALTH SURVEILLANCE FOR XYLENE which can be found at https://www.safeworkaustralia.gov.au/system/files/documents/2002/health_monitoring_guidance_-_xylene.pdf