Vitreflon V790 Pack B

A&I Coatings Pty Ltd

Revision date : 2023-02-01

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07 GHS08
Health risk rating 4
Safety risk rating 3
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

123-86-4

Name of the chemical

acetic acid, butyl ester

Concentration

<5

EC/CAS

64742-95-6

Name of the chemical

Solvent naphtha (petroleum), light arom

Concentration

10-30

General Information

Revision date

2023-02-01

Product name

Vitreflon V790 Pack B

1.2.1 Relevant identified uses

Component of two-part coating for decoration and protection of substrates

Emergency telephone

61 3 8769 0291

Icons in SDS

GHS02 GHS07 GHS08 M004 M008 M009 M010 M011 M017 M026

Company Information

company name

A&I Coatings Pty Ltd

e-mail address of the competent person responsible for the Safety Data Sheet

helpdesk@aicoatings.com

GHS Information

Signal word

DANGER

Hazard Codes

Hazard statements (CLP)

H225, H304, H315, H317, H320, H332, H335

Hazard statements

Code

Statements

H225

Highly Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Hazard statements

This product is classified as: Xn, Harmful. Xi, Irritating. F+, Highly Flammable. Hazardous according to the criteria of SWA. Dangerous according to Australian Dangerous Goods (ADG) Code, IATA and IMDG/IMSBC criteria. H225: Highly flammable liquid and vapour. H304: May be fatal if swallowed and enters airways. H315: Causes skin irritation. H317: May cause an allergic skin reaction. H320: Causes eye irritation. H332: Harmful if inhaled. H335: May cause respiratory irritation.

SUSMP Classification

S6

ADG classification

Class 3 Flammable liquids

UN Number

1263, PAINT (including paint, lacquer, enamel, stain, shellac, varnish, polish, liquid filler and liquid lacquer base) or PAINT RELATED MATERIAL (including paint thinning or reducing compound) (see 3.2.5 for relevant AUST entries)

Signal word

DANGER Flammable liquids Category 2

Aspiration hazard

Category 1 Skin Irritation Category 2 Skin Sensitisation Category 1 Eye irritation Category 2B Acute Toxicity Inhalation Category 3 Specific Target Organ Toxicity - Single Exposure Category 3

Prevention

P102: Keep out of reach of children. P210: Keep away from heat, sparks, open flames and hot surfaces. - No smoking. P233: Keep container tightly closed. P240: Ground/bond container and receiving equipment. P241: Use explosion-proof electrical ventilating, lighting and other equipment. P242: Use only non-sparking tools. P243: Take precautionary measures against static discharge. P261: Avoid breathing fumes, mists, vapours or spray. P262: Do not get in eyes, on skin, or on clothing. P264: Wash contacted areas thoroughly after handling. P271: Use only outdoors or in a well ventilated area. P272: Contaminated work clothing should not be allowed out of the workplace. P273: Avoid release to the environment. P280: Wear protective gloves, protective clothing and eye or face protection.

Response

P362: Take off contaminated clothing and wash before reuse. P301+P310 IF SWALLOWED Immediately call a POISON CENTRE or doctor P301+P330+P331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting P303+P361+P353 IF ON SKIN (or hair) Remove immediately all contaminated clothing. Rinse skin with water P304+P340 IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P313 If skin irritation or rash occurs Get medical advice P337+P313 If eye irritation persists Get medical advice P381: Eliminate all ignition sources if safe to do so. P370+P378: In case of fire, use carbon dioxide, dry chemical, foam. Alcohol resistant foam is the preferred firefighting medium but, if it is not available, normal foam can be used.

Storage

P405: Store locked up. P410: Protect from sunlight. P402+P404: Store in a dry place. Store in a closed container. P403+P235: Store in a well-ventilated place. Keep cool.

Disposal

P501: If they can not be recycled, dispose of contents to an approved waste disposal plant and containers to landfill (see Section 13 of this SDS). Emergency Overview Physical Description & Colour: Clear colourless liquid Odour: Solvent odour.

Health hazards

irritating to eyes and skin, possible skin sensitiser, if aspirated, may cause lung damage SWA has released a document entitled GUIDELINES FOR HEALTH SURVEILLANCE FOR ISOCYANATES which can be found at http://www.safeworkaustralia.gov.au/sites/SWA/about/Publications/Documents/514/Isocyanates.pdf

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.