General Information
Revision date
2014-01-01
Product name
BathWorks DIY White High Speed Filler
Manufacturer Name
Munro Products
Emergency telephone
1-800-424-9300
Icons in SDS
Company Information
company name
9150 Clarence Center Road
Section 2
Hazardous Ingredients
OSHA COMMON NAME CHEMICAL NAME ACGIH
Appearance/Odor
White thick paste with typical styrene odor. SECTION IV - FIRE AND EXPLOSION HAZARD DATA FLASH POINT: 100 F SFCC FLAMMABLE LIMITS: NA LEL: NA UEL: NA EXTINGUISHING MEDIA: Foam, carbon dioxide, dry chemical, water fog. SPECIAL FIRE FIGHTING PROCEDURES NA UNUSUAL FIRE AND EXPLOSION HAZARDS: Syrene will polymerize at elevated temperatures of fire conditions. If this occurs in a closed container, there is a possibility of violent rupture. SECTION V - HEALTH HAZARD DATA
Principle Routes of Exposure
(X) INHALATION (X) SKIN (X) INGESTION
Health hazards
(ACUTE AND CHRONIC) Objectionable odor, eye and nasal irritation, dizziness and drunkeness. CARCINOGENICITY: (X) NTP (NA) IARC
Medical Conditions Generally Aggravated by Exposure
NA FIRST AID: EYES: Flush with water for 15 minutes. Contact physician. SKIN: Wash with mild soap and water. INHALATION: Remove from contamination to fresh air. INGESTION: DO NOT INDUCE VOMITING. SECTION VI - REACTIVITY DATA STABILITY: Stable CONDITIONS TO AVOID: Uncontrolled reactions with peroxides. INCOMPATIBILITY: Strong acids, peroxides, and oxidizing agents. HAZARDOUS DECOMPOSITION OR BYPRODUCTS: NA HAZARDOUS POLYMERIZATION: May Occur. CONDITIONS TO AVOID: Sunlight, open flame, contamination. SECTION VII - SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Remove all sources of ignition. Absorb with inert materials and place in closed containers. WASTE DISPOSAL METHOD: Burn in an adequate incinerator or bury in an approved landfill in accordance with applicable laws. PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in ambient temperature in a well ventilated area away from excessive heat or open flame. OTHER PRECAUTIONS: Avoid breathing vapors SECTION VIII - PROTECTIVE EQUIPMENT RESPIRATORY PROTECTION: NA VENTILATION: Local Exhaust recommended. Mechanical good general ventilation. PROTECTIVE GLOVES: Polyethylene or rubber. EYE PROTECTION: Safety glasses with side shields. OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Clean clothing covering body. WORK/HYGIENE PRACTICES: Practice good hygiene and use with caution to avoid eye and skin contact. TUB REFINISHING, INC. DBA MUNRO PRODUCTS NON WARRANTY The information presented herein, while not guaranteed, is to the best of our knowledge true and accurate. No warranty or guarantee expressed or implied is made regarding the performance of any product, since the manner of use is beyond our control. No suggestion for product use, nor anything contained herein, shall be construed as a recommendation for its use in infringement of any existing patent, and Munro assumes no responsibility or liability for operations that do infringe any such patents. TUB REFINISHING, INC. DBA MUNRO PRODUCTS SECTION I - PRODUCT IDENTIFICATION MANUFACTURER: Munro Products DISTRIBUTOR: 9150 Clarence Center Road Clarence Center, NY 14032 INFORMATION: 716/741-9450 EMERGENCY: CHEMTREC® 1-800-424-9300 PRODUCT CLASS: HARDENER PASTE TRADE NAME: BathWorks DIY Filler Cream Hardener CODE: BW-Filler Hardener