Sakrete Fast Setting Cement Patcher

SECTION 2: Hazards identification

Potential health effects

NOTE: Potential health effects may vary depending upon the duration and degree of exposure. To reduce or eliminate health hazards associated with this product, use exposure controls or personal protection methods as described in Section 12. EYE CONTACT (Acute/Chronic) Exposure to airborne dust may cause immediate or delayed irritation or inflammation of the cornea. Eye contact by larger amounts of dry powder or splashes of wet Cement Patcher may cause effects ranging from moderate eye irritation to chemical burns and blindness. SKIN CONTACT (Acute) Exposure to dry Cement Patcher may cause drying of the skin with consequent mild irritation or more significant effects attributable to aggravation of other conditions. Discomfort or pain cannot be relied upon to alert a person to a hazardous skin exposure. (Chronic) Dry Cement Patcher coming in contact with wet skin or exposure to wet Cement Patcher may cause more severe skin effects, including thickening, cracking or fissuring of the skin. Prolonged exposure can cause severe skin damage in the form of chemical (caustic) burns. (Acute/Chronic) Some individuals may exhibit an allergic response upon exposure to Cement Patcher. The response may appear in a variety of forms ranging from a mild rash to severe skin ulcers. INHALATION (Acute) Exposure to Cement Patcher may cause irritation to the moist mucous membranes of the nose, throat and upper respiratory system. Pre-existing upper respiratory and lung diseases may be aggravated by inhalation. (Chronic) Inhalation exposure to free crystalline silica may cause delayed lung injury including silicosis, a disabling and potentially fatal lung disease, and/or cause or aggravate other lung diseases or conditions. INGESTION (Acute/Chronic) Internal discomfort or ill effects are possible if large quantities are swallowed. CARCINOGENIC POTENTIAL

Appearance/Odor

Gray, odorless BOILING POINT > 1000°C VAPOR PRESSURE Not applicable pH (IN WATER) 12 to 13 (ASTM D 1293-95) SPECIFIC GRAVITY 2.5 – 2.8 (H2O = 1.0) PHYSICAL STATE: Solid (Powder mixed with sand.) MELTING POINT: > 1000°C VAPOR DENSITY: Not applicable SOLUBILITY IN WATER: Slightly soluble (0.1% to 1.0%) EVAPORATION RATE: None 8. FIRE AND EXPLOSION FLASH POINT None AUTO IGNITION Not combustible TEMPERATURE Not applicable LOWER EXPLOSIVE LIMIT: None UPPER EXPLOSIVE LIMIT: None None