Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Titanium dioxide
Concentration
N/A
General Information
Product name
Floor Sign Epoxy
Product Synonyms
Modified Epoxy Resin
CAS No.
13463-67-7
1.2.1 Relevant identified uses
Titanium Dioxide
Icons in SDS
Company Information
company name
800)248-8907 “Manufactured by exclusively for InSite Solutions LLC.
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) *****************************EMERGENCY OVERVIEW**************************** Viscous resinous material with mild, characteristic odor. Color indicated on label. Eye and skin irritant. May cause irritation and allergic skin reactions. Avoid contact with eyes, skin and clothing. ****************************************************************************************
Potential health effects
EYE: Causes mild to moderate eye irritation. SKIN: May cause irritation and allergic skin reactions. INGESTION: Swallowing large amounts may cause injury and GI tract irritation. INHALATION: May cause respiratory tract irritation. CHRONIC (CANCER INFORMATION): Contains Microcrystalline Silica. Inhalation of silica dust (respirable) may cause delayed lung injury or disease. The International Agency for Research on Cancer (IARC) has evaluated that there is "sufficient evidence" that Microcrystalline Silica can cause cancer in laboratory animals and there is "limited evidence" with respect to humans. IARC Monograph: Level 2A Grouping. Take appropriate measures to avoid breathing spray during application or removal of cured product by use of NIOSH approved respirator. Product Code: Floor Sign Epoxy Part A (Resin) SECTION IV - FIRST AID MEASURES EYES: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids apart to ensure rinsing of entire eye surface and lids with water. SKIN: Promptly wipe clean with paper or cloths and wash with soap and water for at least 15 minutes. Remove, discard or decontaminate clothing prior to use. INGESTION: If swallowed, give at least 3-4 glasses of water but do not induce vomiting. If vomiting occurs, give water again. Do not give anything by mouth to an unconscious or convulsing person. Get medical attention and have physician determine whether vomiting or stomach evacuation is necessary. If mixed product (floorsignepoxy Part A and Part B) is swallowed, follow above steps and get immediate medical attention. INHALATION: If ill effects occur, remove to fresh air. Keep warm and quiet and get medical attention promptly. SECTION V - FIRE FIGHTING MEASURES FLAMMABLE PROPERTIES: FLASH POINT > 200 Deg. F (95 Deg. C) Method CC HAZARDOUS COMBUSTION PRODUCTS: Carbon monoxide, carbon dioxide and aldehydes. EXTINGUISHING MEDIA: Foam, carbon dioxide, dry chemical or water spray. FIRE FIGHTING INSTRUCTIONS: Firefighters should wear goggles and self-contained breathing apparatus to avoid inhalation. SECTION VI - ACCIDENTAL RELEASE MEASURES SMALL SPILL: Absorb spill with suitable absorbent material (dry sand, earth) and shovel into closed containers for proper disposal. Flush contaminated area with water. LARGE SPILL: Dike area and pump into closed containers. Prevent runoff from entering into storm sewers and ditches, which could lead to natural waterways. Wear protective equipment during cleanup. SECTION VII - HANDLING AND STORAGE HANDLING: This material may cause irritation. Do not get in eyes, on skin or clothing. Do not allow contaminated clothing to come in contact with skin. Avoid contact with vapors and fumes. Wear protective equipment.
Storage
Store in closed containers in cool, dry, place. Avoid heat and warm storage areas. Product Code: Floor Sign Epoxy Part A (Resin) SECTION VIII - EXPOSURE CONTROLS AND PERSONAL PROTECTION ENGINEERING CONTROLS: Control airborne concentrations below the exposure limits. Use only with adequate ventilation. Local exhaust and general ventilation is recommended. RESPIRATORY PROTECTION: NIOSH approved respirator suitable for organic vapors if TLV is exceeded. SKIN PROTECTION: Chemical-resistant plastic or rubber gloves. Wear protective equipment as required to prevent wetting the skin or clothing. EYE PROTECTION: Chemical splash goggles. SECTION IX - PHYSICAL AND CHEMICAL PROPERTIES BOILING POINT: Not applicable MELTING POINT: Not applicable VAPOR DENSITY: Non-volatile % VOLATILES: NIL SOLUBILITY IN WATER: Insoluble SPECIFIC GRAVITY: 1.49 ODOR: Mild, characteristic odor APPEARANCE: Resinous, viscous liquid. Color indicated on label. SECTION X - STABILITY AND REACTIVITY CHEMICAL STABILITY: (CONDITIONS TO AVOID) Keep away from heat and warm storage. Stable. INCOMPATIBILITY: Strong oxidizers and epoxy hardeners under uncontrolled conditions. HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, aldehydes. HAZARDOUS POLYMERIZATION: Will not occur. SECTION XI - TOXICOLOGICAL INFORMATION None Available SECTION XII - ECOLOGICAL INFORMATION None available SECTION XIII - DISPOSAL CONSIDERATIONS Care should be taken to ensure that the material or its containers are disposed of in an approved facility in accordance with current federal, state and local regulations. Product Code: Floor Sign Epoxy Part A (Resin) SECTION XIV - TRANSPORT INFORMATION Not regulated by DOT SECTION XV - REGULATORY INFORMATION